“Effect of Additives and Aging on Moisture-Induced Damage Potential of Asphalt Mixes using Surface Free Energy and Laboratory-based Performance Tests” (Ali, S. A., Zaman, M., Ghabchi, R., Rahman, M. A., Ghos, S., Rani, S.). International Journal of Pavement Engineering 23(2), 285-296. https://doi.org/10.1080/10298436.2020.1742335, 2022.
“Review of Strength Improvements of Biocemented Soils” (Xiao, Y., He, X., Zaman, M., Ma, G., Zhao, C.). International Journal of Geomechanics, 22(11), https://doi.org/10.1061/(ASCE)GM.1943-5622.0002565, 2022.
“Investigation of Stress State During Cement Hardening and its Effect on Failure of Cement Sheath in Shale Gas Wells” ( Zhao, C., Li, J., Zaman, M.). Journal of Energy Resources and Technology, 144(8), 2022.
“Performance of Asphalt Mixes Containing Post-Consumer Recycled (PCR) Plastic using Balanced Mix Design Approach and Dry Process” (Ghos, S., Sumter, C., Cancino, P. C., Ali, S. A., Zaman, M., Hobson, K. R., Kalicki, G., Metzer, D.). Transportation Research Record, 2676(9). https://doi.org/10.1177/03611981221088200, 2022.
“Factors Contributing to Fatigue Cracking in Flexible Pavements in Oklahoma: A Case Study Using Laboratory and Field Investigation and AASHTOWare Simulation” (Ghos, S., Ali, S. A., Zaman, M., R., Larrain-Mendez, M., Behm, M.). Journal of Testing and Evaluation, 50(2), 20 pages. http://dx.doi.org/10.1520/JTE20200652, 2022.
“Moisture-Induced Damage Potential of Asphalt Mixes Containing Polyphosphoric Acid and Antistripping Agent” (Rani, S., Ghabchi, R., Ali, S. A., Zaman, M., O’Rear, E. A.). Road Materials and Pavement Design 23(12), 2818-2838. https://doi.org/10.1080/14680629.2021.2002180, 2022.
“Rainfall-Induced Erosion of Biocemented Graded Slopes” ( Xiao, Y., Ma, G., Wu, H., Lu, H., Zaman, M.. International Journal of Geomechanics, 22(1), https://doi.org/10.1061/(ASCE)GM.1943-5622.0002239, 2022.
“Effect of WMA additive on properties of PPA-Modified Asphalt Binders Containing Anti-Stripping Agent” (Ghabchi, R., Rani, S., Zaman, M., Ali, S. A. International Journal of Pavement Engineering, 22(4), 418-431, 2021.
“Laboratory Characterization of Moisture-Induced Damage Potential of Asphalt Mixes Using Conventional and Unconventional Performance-Based Tests” (Ali, S. A., Ghabchi, R., Zaman, M., Rani, S., Rahman, M. A.). International Journal of Pavement Research and Technology, 15, 1209–1226, https://doi.org/10.1007/s42947-021-00083-5, 2022.
“Rutting and Moisture-Induced Damage Potential of Foamed Warm Mix Asphalt (WMA) Containing RAP” (Rahman, M. A., Ghabchi, R., Zaman, M., Ali, S. A.).Innovative Infrastructure Solutions, 6(3), 1-11, 2021.
“Technical Challenges of Utilizing Ground Tire Rubber in Asphalt Pavements in the United States” (Ghabchi, R., Arshadi, A., Zaman, M., March, F.) Materials, 14(6), 2021.
“Evaluation of Mix Design Volumetrics and Cracking Potential of Foamed Warm Mix Asphalt (WMA) Containing Reclaimed Asphalt Pavement (RAP)” (Rahman, M. A., Zaman, M., Ali, S. A., Ghabchi, R., Ali, S. A., Ghos, S.). International Journal of Pavement Engineering, 1-13. https://doi.org/10.1080/10298436.2021.1902522,2021.
“Interpretation of Displacement Fields Around Hydraulic Fracture Tip using Digital Image Correlation Method” (Dong, J.-N., Chen, M., Zaman, M. ). International Journal of Oil, Gas and Coal Technology, 27(4), 2021.
“Evaluation of Stripping Resistance of Organoclay-modified Asphalt Binder and Aggregate Systems Using an Optical Contact Angle Analyzer” (Hossain, Z., Bairagi, B., Zaman, M., Bulut, R.). Sustainable Civil Infrastructure, DOI: 10.1007/978-3-030-79647-1_5, 2021.
“Rheology of Virgin Asphalt Binder Combined with High Percentages of RAP Binder Rejuvenated with Waste Vegetable Oil” (Dugan, C. R., Sumter, C. R., Rani, S., Ali, S. A., O’Rear, E. A., Zaman, M.). ACS Omega, 5(6), 15791-15798. DOI: 10.1021/acsomega.0c00377, 2020.
“Aggregate Characteristics-Based Preventive Maintenance Treatments for Optimized Skid Resistance of Pavements” (Li, Q. J., Pittenger, D., Wang, K. P., Yang, G., Zaman, M., Zhan, Y. J.). Journal of the Transportation Research Board (TRR), 2674(12), 372-384. https://doi.org/10.1177/0361198120953153, 2020.
“Experimental Study of Multi-timescale Crack Blunting in Hydraulic Fracture” (Dong, J.-N., Yuan, G.-J., Wang, X.-Y., Chen, M., Jin, Y., Zeng, C., Zaman, M.). Petroleum Science Online.https://doi.org/10.1007/s12182-020-00479-1, 2020.
“Relationships Between Compressive and Flexural Strengths of Concrete Based on Fresh Field Properties” (Campos, R., Mendez Larain, M. M., Zaman, M., Pozades, V.). International Journal of Pavement Research and Technology, 7 pages. doi.org/ 10.1007/s42947-020-1074-0, 2020.
“Effects of Load Duration and Stress Level on Deformation and Particle Breakage of Carbonate Sands” (Xiao, Y., Desai, C. S., Zhengxin, Y., Zaman, M., Ma, Q., Chen, Q., Liu, H.). International Journal of Geomechanics, ASCE, Special Collection on Testing and Modeling on Particle Breakage for Granular Soils. doi.org/10.1061/(ASCE)GM.1943-5622.0001731, 2020.
“Characterization of Effect of Polymer Modification, Poly-Phosphoric Acid and Aging on Asphalt Binder Using X-ray Diffraction (XRD)” (Ali, S. A., Ghabchi, R., Rani, S., Zaman, M.). Journal of Testing and Evaluation, ASTM, 2019.
“Laboratory Characterization of Asphalt Binders Containing a Chemical-Based Warm Mix Asphalt Additive” (Zaman, M., Rani, S., Ghabchi, R., Ali, S. A.). Journal of Testing and Evaluation,. https://doi.org/10.1520/JTE20180409 . ISSN 0090-3973, 2019.
“Panel Models for Pavement Friction of Major Preventive Maintenance Treatments” (Zhan, Y., Li, Q. J., Yang, G., Pittenger, D., Wang, K. P., Zaman, M.). International Journal of Geomechanics, ASCE, 19(8). doi.org/10.1061/(ASCE)GM.1943-5622.0001445, 2019.
“Study on Micro-Scale Properties of Cohesive Zone in Shale” (Dong, J., Chen, M., Jin, Y., Hong, G., Zaman, M., Li, Y.). International Journal of Solids and Structures, 163(15), 178-193, 2019.
“Experimental and Theoretical Study on Dynamic Hydraulic Fracture” (Dong, J., Chen, M., Li, Y., Wang, S., Zeng, C., Zaman, M.). Energies, 12(3), 2019.
“Porothermoelastic Response and Damage Potential of Tripping Unconventional Cores from Six Different Shale Plays” (Taghichian, A., Hashemolhosseini, H., Zaman, M., Yang, Z. Y.). International Journal of Geomechanics, ASCE, 19(January). doi.org/10.1061/(ASCE)GM.1943-5622.0001328, 2019.
“Kernel Machines and Firefly Algorithm Based Dynamic Modulus Prediction Model for Asphalt Mixes Considering Aggregate Morphology” (Singh, D., Maheshwari, S., Zaman, M., Commuri, S.). Journal of Construction and Building Materials, 159, 408-416, 2018.
“Flexural Properties of Chemically-Stabilized Subgrade in Designing Semi-Rigid Pavements” (Nazari, M., Ghabchi, R., Zaman, M.). Road Materials and Pavement Design. DOI: 10.1080/14680629.2017.1422435, 2018.
“Nonrecoverable Compliance and Recovery Behavior of Polymer-Modified and Reclaimed Asphalt Pavement (RAP)–Modified Binders in Arkansas” (Rahman, M., Hossain, Z., Zaman, M.). ASTM Journal of Testing and Evaluation, 46(6):20170071. DOI: 10.1520/JTE20170071, 2018.
“Artificial Neural Network Based Intelligent Compaction Analyzer for Real-Time Estimation of Subgrade Quality” (Imran, A. S., Barman, M., Commuri, S., Zaman, M., Nazari, M.). International Journal of Geomechanics, ASCE, 18. ISSN: Print: 1532-3641; Online: 1943-5622, 2018.
“An Alternate Analysis of Indirect Tensile Test Results for Evaluating Fatigue Characterization of Asphalt Mixes” (Barman, M., Ghabchi, R., Singh, D., Zaman, M., Commuri, S.). Journal of Construction and Building Materials. DOI10.1016/j.conbuildmat.2018.01.049, Elsevier, 2018.
“Propagation and Aperture of Staged Hydraulic Fractures in Unconventional Resources in Toughness-Dominated Regimes” (Taghichian, A., Hashemalhoseini, H., Zaman, M. and Zavareh, S.B.). Journal of Rock Mechanics and Geotech. Engineering, Vol 10, No. 2, 2018, pp. 249-258.
“Influence of Tensile Strain at Failure on Flexural Properties of a Cementitiously Stabilized Subgrade Soil” (Nazari, M., Ghabchi, R., Zaman, M.). International Journal of Geomechanics, ASCE, 17(2). (ASCE)GM.1943-5622.0000731, 2017.
“Performance Evaluation of Plant-Produced Warm Mix Asphalts Containing RAP and RAS” (Arshadi, A., Steger, R., Ghabchi, R. A., Zaman, M., Hobson, K., Commuri, S.). Road Materials and Pavement Design, 18, 2017, pp. 1-18.
“Modelling the Dynamics of Asphalt-Roller Interaction during Compaction” (Imran, A., Commuri, S., Barman, M., Zaman, M., Beainy, F.). Journal of Construction Engineering and Management, ASCE. DOI: 10.1061/(ASCE)CO.1943-7862.0001293, 2017.
“Design of Semi-Rigid Type of Flexible Pavements” (Solanki, P., Zaman, M.).International Journal of Pavement Research and Technology, 10(2), 2017, pp. 99-111.
“Sensitivity of Traffic Input Parameters on Rutting Performance of a Flexible Pavement Using Mechanistic Empirical Pavement Design Guide” (Hossain, N., Singh, D., Zaman, M.). International Journal of Pavement Research and Technology, 9(6), 2016, pp. 450-459.
“Quality Improvement of Subgrade Using Intelligent Compaction” (Barman, M., Nazari, M., Imran, S. A., Commuri, S., Zaman, M.). Transportation Research Record: Journal of the Transportation Research Board, the National Academies, TRR No. 2579, 2016, pp. 59-69.
“Micro-Structural Analysis of Moisture-Induced Damage Potential of Asphalt Mixes Containing RAP” (Ghabchi, R., Singh, D.V., Zaman, M., Hossain, Z.). ASTM Journal of Testing and Evaluation, 44(1), 2016, pp. 194-205.
“Enhancing Prediction of Rut by MEPDG Using Data from Field Test Section in Oklahoma” (Hossain, N., Singh, D.V., Zaman, M.). Transportation Research Record: Journal of the Transportation Research Board, National Academies, TRR No. 2590, 2016, pp. 28-36.
“Continuous Monitoring of Subgrade Stiffness during Compaction” (Imran, S., Barman, M., Nazari, M., Commuri, S., Zaman, M.). Transportation Research Procedia, 17, 2016, pp. 617-625.
“Quality Control of Subgrade Soil Using Intelligent Compaction” (Barman, M., Nazari, M., Imran, S., Commuri, S., Zaman, M., Beainy, F., Singh, D.V.). Innovative Infrastructure Solutions, Springer Verlag, Berlin, 2016, pp. 1-23.
“Comparison of Laboratory Performance of Asphalt Mixes Containing Different Proportions of RAS and RAP” (Ghabchi, R., Barman, M., Singh, D.V., Zaman, M., Mubaraki, M. A.). Journal of Construction and Building Materials, Vol. 124, 2016, pp. 343-351.
“Evaluation of Moisture Susceptibility of Nanoclay-Modified Asphalt Binders through the Surface Science Approach” (Hossain, Z., Zaman, M., Hawa, T., Saha, M.). Journal of Materials in Civil Engineering, Volume 27, Issue 10. 2015, pp. 10-18.
“Regression Modeling of Resilient Modulus of Unbound Aggregates” (Hossain, Z., Zaman, M. and Doiron, C.). Journal of Marine Science and Technology, Vol. 23, No. 3, 2015, pp. 388-398.
“Laboratory Characterization of Asphalt Mixes Containing RAP and RAS” (Ghabchi, R., Singh, D., Zaman, M., and Hossain, Z). International Journal of Pavement Engineering, DOI: 10.1080/10298436.2015.1022778 (Available Online), 2015, pp. 1-18.
“Laboratory evaluation of stiffness, low-temperature cracking, rutting, moisture damage, and fatigue performance of WMA mixes” (Ghabchi, R., Singh, D.V., and Zaman, M.). Journal of Road Materials and Pavement Design, Vol. 16, No. 2, 2015, pp. 334-357.
“Moisture Susceptibility Evaluation of Nano-sized Hydrated Lime-Modified Asphalt-Aggregate Systems Based on Surface Free Energy Concept,” Diab, A., You, Z., Hossain, Z., and Zaman, M. (2015). Journal Transportation Research Board, Volume 2446, pp. 52–59.
“Laboratory evaluation of stiffness, low-temperature cracking, rutting, moisture damage, and fatigue performance of WMA mixes,” Ghabchi, R., Singh, D., and Zaman, M. (2015). Journal of Road Materials and Pavement Design, Vol. 16, No. 2, pp. 334-357.
“Laboratory Characterization of Asphalt Mixes Containing RAP and RAS,” Ghabchi, R., Singh, D., Zaman, M., and Hossain, Z., (2015). International Journal of Pavement Engineering, DOI: 10.1080/10298436.2015.1022778 (Available Online), pp. 1-18.
“Development of Rut Prediction Models from an Instrumented In-Service Test Section on Interstate-35,” Hossain, N., Singh, D. and Zaman, M. (2014). International Journal of Pavement Research and Tech., Vol. 8, No. 5, pp. 305-314.
“Regression Modeling of Resilient Modulus of Unbound Aggregates.” Hossain, Z., Zaman, M. and Doisron, C. (2015).Journal of Marine Science and Technology, Vol. 23, No. 3, pp. 388-398.
“Evaluation of Moisture Susceptibility of Nanoclay-Modified Asphalt Binders through the Surface Science Approach,” Hossain, Z., Zaman, M., Hawa, T., Saha, M. (2015). Journal of Materials in Civil Engineering, Volume 27, Issue 10. pp. 10-18.
“Implementation of the Multiple Stress Creep Recovery (MSCR) Test Method to Characterize Polymer-Modified Asphalt Binders for Oklahoma Conditions,” Hossain, Z., Ghosh, D., and Zaman, M. (2015). ASTM Journal of Testing & Evaluation (JTE), 44.1S (2015), pp. 1-14.
“Mechanical Behavior of Granular Materials under Continuously Varying b Values Using DEM.” Phusing, D., Suzuki, K., and Zaman, M. (2015). Int. J. Geomechanics, ASCE, 10.1061/(ASCE)GM.1943-5622.0000506, 04015027.
“Application of Intelligent Compaction Technology for Estimation of Effective Modulus for a Multilayered Asphalt Pavement,” Singh, D.V., Beainy, F., Commuri, S., and Zaman, M. (2015). ASTM Journal of Testing and Evaluation, Vol. 43, Issue 2, pp. 1-11.
”Effect of Recycled Asphalt Pavement on Thermal Cracking Resistance of Hot-Mix Asphalt.” Solanki, P., Zaman, M., Adje, D., and Hossain, Z. (2015). International Journal of Geomechanics, ASCE, 15(5), A4014001.
“Numerical Analysis for a Realistic Support Design – A Case Study: Komurhan Tunnel,” (Elazig/Eastern Turkey), Yalcin, E., Gurocak, Z., Ghabchi, R., and Zaman, M. (2015). International Journal of Geomechanics, ASCE, DOI: 10.1061/(ASCE)GM.1943-5622.0000564.
“Stress Shadow Size and Aperture of Hydraulic Fractures in Unconventional Shales.” Taghichian, A., Zaman, M. and Davegowda, D. (2014). Petroleum Science and Engineering Journal, 124, pp. 209-221.
“Behavior of Stabilized Subgrade Soils Under Indirect Tension and Flexure,” Solanki, P., and Zaman, M. (2014), Journal of Materials in Civil Engineering, ASCE, 26(5), pp. 833-844.
“Effect of Recycled Asphalt Pavement on Thermal Cracking Resistance of Hot-Mix Asphalt,” Solanki, P., Zaman, M., Adje, D., and Hossain, Z., International Journal of Geomechanics, ASCE, 10.1061/(ASCE)GM.1943-5622.0000398 , A4014001.
“Regression Modeling of Resilient Modulus of Unbound Aggregates,” Hossain, Z., Zaman, M., and Doiron, C. (2014). International Journal of Marine Science and Technology (JMST), Vol. 19, No. 2 (29 pages).
“Micro-Structural Analysis of Moisture-Induced Damage Potential of Asphalt Mixes Containing RAP,” Ghabchi, R., Singh, D., Zaman, M., and Hossain, Z. (2014). ASTM, Journal of Testing and Evaluation, 44, No. 1.
“Evaluation of Moisture Susceptibility of Asphalt Mixes Containing RAP and Different Types of Aggregates and Asphalt Binders Using the Surface Free Energy Method,” Ghabchi, R., Singh, D., and Zaman, M. (2014). Journal of Construction & Building Materials., Vol. 73, pp. 479-489.
“Effect of Shape Parameters and Gradation on Laboratory Measured Permeability of Aggregate Bases,” Ghabchi, R., Zaman, M., Kazmee H., and Singh, D. (2014). International Journal of Geomechanics, 10.1061/(ASCE)GM.1943-5622.0000397.
“A Visco-elastic-plastic Model of Asphalt/Roller Interaction During Field Compaction,” Beainy, F., Commuri, S., and Zaman, M. (2014). Journal of Engineering Mechanics, ASCE, Vol. 140, Issue 7, pp. 1-12, http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000730.
“Achievable Quality During the Compaction of Asphalt Pavement,” Beainy, F., Singh, D.V., Commuri, S., Zaman, M. (2014). International Journal of Pavement Research and Technology (IJPRT), Vol. 7, Issue 5, pp. 317-323.
“Field Construction and Mechanistic Performance of Hot Mix Asphalt Containing Reclaimed Asphalt Pavement,” Solanki, P., Zaman, M., Adje, D., and Hossain, Z. (2013) Journal of Pavement Research and Technology, Vol. 6, No. 4, pp. 403-413.
“Artificial Neural Network Modeling for Dynamic Modulus of Hot Mix Asphalt Using Aggregate Shape Properties.” Singh, D., Zaman, M. and Commuri, S. (2013), Materials in Civil Engineering, Vol. 25, No. 1, pp. 54-62.
“Effects of Production and Sample Preparation Methods on Aggregate Shape Parameters,” Singh, D., Zaman, M. and Commuri, S. (2013), Journal of Pavement Engineering, Vol 14, No. 2, pp. 154-175.
”Evaluation for Warm-Mix Additive-Modified Asphalt Binders Using Spectroscopy Techniques.” Hossain, Z., Lewis, S., Zaman, M., Buddhala, A., and O’Rear, E. (2013). Journal of Materials in Civil Engineering, ASCE, Vol. 25, No. 2, pp. 149–159.
“Behavior of Selected Warm Mix Asphalt Additive Modified Binders and Prediction of Dynamic Modulus of the Mixes,” Hossain, Z. and Zaman, M. (2013), ASTM Journal of Testing and Evaluation, DOI: 10.1520/JTE104639; Vol. 41, No. 1 (12 pages).
“Influence of In-Isolation Properties of Geogrid on Their Pullout Properties in a Dense Graded Aggregate,” Hatami, K., Mahmood, T., Ghabchi, R., and Zaman, M. (2013), Indian Geotech. Journal, Vol. 43, No. 4, pp. 303-320.
“Mechanistic Evaluation of Effect of WMA-Additives on Wettability and Moisture Susceptibility Properties of Asphalt Mixes.” Ghabchi, R., Singh, D., Zaman, M. and Tian, Q. (2013), Journal of Testing and Evaluation, Vol. 41, No. 6, 2013, pp. 1-10.
“Visco-Elastic-Plastic Model of Asphalt-Roller Interaction”. Beainy, F., Commuri, S., Zaman, M., and Syed, I. (2013), Journal of Geomechanics, ASCE, DOI: 10.1061/(ASCE)GM.1943-5622.0000240.
“Susceptibility of Asphalt Binder with Warm Mix Additives to Moisture Induced Damage by Surface Free Energy Analysis,” Budhala, A., Hossain, Z., Wasiuddin, N. M., Zaman, M., and O’Rear, E. A. ASTM Journal of Testing and Evaluation, Volume 40, Issue 1, January 2012.
“Influence of Recovery Processes on Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement,” Hossain, Z., Solanki, P., Zaman, M., Lewis, S., and Hobson, K., Journal of ASTM International (JAI), Vol. 9, Issue 3, February 2012.
“Sensitivity of Oklahoma Binders on Dynamic Modulus of Asphalt Mixes and Distress Functions,” Hossain, Z., and Zaman, M., Journal of Materials in Civil Engineering, Volume 24, No. 8, August, 2012.
“Evaluation of Dynamic Modulus of Modified and Unmodified Asphalt Mixes for Different Input Levels of the MEPDG,” Singh, D.V., Zaman, M., and Commuri, S. (2012)., International Journal of Pavement Research and Technology (IJPRT), Vol.5, Issue: 1, pp. 1-11.
“A Laboratory Investigation into the Effect of Long-Term Oven Aging on RAP Mixes Using Dynamic Modulus Test,” Singh, D.V., Zaman, M., and Commuri, S. (2012)., International Journal of Pavement Research and Technology (IJPRT), Vol.5, Issue: 3, pp. 142-152.
“Comparison of Shape Parameters for Selected Coarse Aggregates in Oklahoma,” Singh, D.V., Zaman, M., and Commuri, S. (2012). ASTM Journal of Testing and Evaluation, Vol. 40, Issue: 3, pp. 409-426.
“Inclusion of Aggregate Angularity, Texture, and Form in Estimating Dynamic Modulus of Asphalt Mixes,” Singh, D.V., Zaman, M., and Commuri, S. (2012)., International Journal of Road Materials and Pavement Design (RMPD), Vol. 13, Issue: 2, pp. 327-344.
“Neural Network Modeling of 85th Percentile Speed for Two-Lane Rural Highways,” Singh, D.V., Zaman, M., and White, L., (2012), Transportation Research Record: Journal of the Transportation Research Board (TRB), Vol. 2301, pp.17-27.
“Evaluation of Durability of Stabilized Clay Specimens Using Different Laboratory Procedures,” Khalife, R., Solanki, P., and Zaman, M. (2012), ASTM Journal of Testing and Evaluation, 40(3), pp. 363-375.
“A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete,” Solanki, P., Zaman, M. M., and Chin, M. (2012), ASTM Advances in Civil Engineering Materials, 1(1), pp. 1-20.
“New Considerations for Empirical Estimation of Tensile Strength of Rocks,” Gurocak, Z., Solanki, P., Alemdag, S. and Zaman, M. M. (2012), Engineering Geology, 145-146, pp. 1-8.
“Effect of Gradation and Source Properties on Stability and Drainability of Aggregate Bases: A Laboratory and Field Study,” Ghabchi, R., Zaman, M., Khoury, N., Kazmee, H., and Solanki, P. (2012), International Journal of Pavement Engineering, 13(6), pp. 1-17.
“Rheological Evaluation of Warm Mix and Anti-stripping Additives Modified Performance Grade Binders.” Hossain, Z., Zaman, M., Wasiuddin, N.M., Sneed, J. and O’Rear, E., Road Materials and Pavement Design, Vol 12, No. 4, 2011, pp. 875-895.
“Sensitivity of Oklahoma Binders on Dynamic Modulus of Asphalt Mixes and Distress Functions.” Hossain, Z. and Zaman, M., Journal of Materials in Civil Engineering, ASCE, DOI:10.1061/(ASCE)MT.1943-5533.0000461, Dec. 2011.
“Evaluation of Measured and Estimated Dynamic Modulus for Selected Asphalt Mixes.” Singh, D., Zaman, M. and Commuri, S., Journal of ASTM International, DOI: 10.1520/JAI103535, Vol. 8, Issue 9, 2011, 19 pages.
“Influence of Recovery Processes on Properties of Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement.” Hossain, Z., Solanki, P., Zaman, M., Lewis, S., and Hobson, K., Journal of ASTM International, DOI: 10.1520/JAI103679, Sept. 2011, 18 pages.
“Life Cycle Cost-Based Pavement Preservation Treatment Design.” Pittenger, D., Gransberg, D., Zaman, M. and Reimer, C., Journal of Transportation Research Board, No. 2235, DOI: 10-3141/2235-04, 2011, pp. 28-35.
“Validation of Back-Calculated Modulus Values from Falling Weight Deflectometer Through Instrumentation on I-35.” Solanki, P., Zaman, M. and Muraleetharan, K., Journal of Transportation Research Board, No. 2227, DOI: 10-3141/2227-09, 2011, pp. 79-86.
“Effect of Cement Kiln Dust and Rock Dust as Mineral Fillers on Bulk Specific Gravity of Fine Aggregates.” Gupta, A., Zaman, M., Laguros, J.G. and Ghabchi, R., ASTM Journal of Testing and Evaluation, DOI: 10.1520/JTE103255, April 2011, 9 pages.
“Effect of Production and Sample Preparation Methods on Aggregate Shape Parameters.” Singh, D.V., Zaman, M. and Commuri, S., International J. of Pavement Engineering, DOI: 10.1080/10298436.2011.635792, Nov. 2011, 22 pages.
“Effectiveness of Water-Bearing and Anti-stripping Additives in Warm Mix Asphalt Technology.” Hossain, Z., Zaman, M., O’Rear, E.A. and Chen, D.H., International J. of Pavement Engineering, DOI: 10.1080/10298436.2011.616588, Sept. 2011, 9 pages.
“Evaluation of Mechanistic-Empirical Design Guide Input Parameters for Resilient Modulus of Subgrade Soils in Oklahoma.” Hossain, Z., Zaman, M., Doiron, C., and Solanki, P., ASTM J. of Testing and Evaluation (JTE), Vol. 39, No. 5, DOI: 10.1520/JTE103603, 2011, 12 pages.
“Evaluation of Predictive Models for Estimating Dynamic Modulus of Hot Mix Asphalt Mixes Used in Oklahoma.” Singh, D., Zaman, M. and Commuri, S., Journal of the Transportation Research Board, No. 2210, Vol. 4, 2011, pp. 57-72.
“In-Situ Assessment of Stiffness During Construction of an Asphalt Pavement.” Singh, D., Mai, A.T., Beainy, F.N., Commuri, S. and Zaman, M., International J. of Pavement Research and Technology, Vol. 4, No. 3, 2011, pp. 131-139.
“Use of Chat-Asphalt as a Paving Material: Field Performance Assessment.” Wasiuddin, N.M., Zaman, M. and Tarefder, R.A., International J. of Pavement Research and Technology, Vol. 4, No. 2, 2011, pp. 71-79.
“Use of Raw Chat in HMA Surface: Environmental and Engineering Characterization” (Wasiuddin, N.m., Hamid, W.B., Zaman, M. and Nairn, R.W.). Accepted for publication in Journal of Solid Waste Tech. and Waste Management, June 2009.
“Calibration of Non-Nuclear PQI Gauges and Field Comparison of PQI and Nuclear Gauge Densities” (Wasiuddin, N.M., Zaman, M. and Commuri, S.). Accepted for publication in International Journal of Pavement Research and Technology, June 2009.
“Effects of Lime and Cement Kiln Dust on the Performance of Lean Clays” (Solanki, P. and Zaman, M.). International Journal of Geotechnical Engineering, June 2009.
“Calibration Procedures for the Intelligent Asphalt Compaction Analyzer” (Commuri, S., Mai, A. and Zaman, M.). ASTM Journal of Testing and Evaluation, June 2009.
“Properties and Moisture Susceptibility of Silty Clay Stabilized with Lime, Class C Fly Ash and Cement Kiln Dust” (Solanki, P., Khoury, N. and Zaman). Journal of Materials in Civil Engineering, ASCE (in press), June 2009.
“Variations of Resilient Modulus of Subgrade Soils with Post-Compaction Moisture Contents” (Khoury, N.K., Zaman, M. and Brooks, R.M.). Journal of Transportation Research Board (in press), June 2009.
“Evaluation of Resilient Moduli of Pavement Layers at an Instrumented Section on I-35 in Oklahoma” (Solanki, P., Zaman, M., Muraleetharan, K. and Timm, D.). International Journal Road Materials and Pavement Design (in press), June 2009.
“Neural Network-Based Intelligent Compaction Analyzer for Estimating Compaction Quality of Hot Asphalt Mixes” (Commuri, S., Mai, A.T., and Zaman, M.). Journal of Construction Engineering and Management, ASCE (in press), June 2009.
“Finite Element Modeling of Cementitiously Stabilized Unnotched Beams Using a Smeared Fracture Approach” (M. Zaman, N. Khoury, and P. Solanki). International Journal of Geomech., ASCE, Vol. 9, No. 1, 2009, pp. 34-42.
“Development and Validation of “Smart Dust” for Pavement Condition Monitoring.” (Pei, J.S., Ivey, R.A., Lin, H., Landram, A.R., Sandburg, C.J., Ferzli, N.A., King, T., Zaman, M. and Refai, H.). Journal of Intelligent Material Systems and Structures, Vol. 20, 2009, pp. 63-85.
“Statistical Models for Determination of the Resilient modulus of Subgrade Soils” (P. Solanki, A. Ebrahimi and M. Zaman). International Journal of Pavement Research and Tech., Vol. 1, No. 3, 2008, pp. 85-93.
“Rock Slope Stability and Excavability Assessment of Rocks at the Kapikaya Dam Site, Turkey” (Gurocak, Z., Alemdag, S. and Zaman, M.). Engineering Geology, Vol. 96, 2008, pp. 17-27.
“Estimation of Bearing Capacity of Basalts at Atasu Dam Site, Turkey” (S. Alemdag, Z. Gurocak, P. Solanki, and M. Zaman). Bulletin of Engineering Geology and The Environment, Vol. 67, No. 1, 2008, pp. 79-85.
“Effect of Sasobit® and Aspha-Min® on Wettability and Adhesion between Asphalt Binders and Aggregates” (N. Wasiuddin, M. Zaman and E.A. O’Rear). Transportation Research Record, Journal of the Transportation Research Board, 2051, 2008, pp. 80-89.
“A Neural Network-Based Compaction Analyzer for Density Measurement During the Construction of an Asphalt Pavement” (S. Commuri, M. Zaman and J.N. Gonzalez). International Journal of Pavement Engineering, Vol. 9, Issue 3, June 2008, pp. 177-188.
“Influences of Various Cementitious Agents on the Performance of Stabilized Aggregate Base Subjected to Wet-Dry Cycles” (N. Khoury and M. Zaman). International Journal of Pavement Engineering, Vol. 8, No. 4, 2007, pp. 265-276.
“A Laboratory Evaluation of Unmodified and Polymer Modified Performance-Grade Binders with Anti-Stripping Additives” (S. Selvamohan, M. Zaman and J.G. Laguros). Journal of Engineering, Computing and Architecture, SJI, Vol. 1, Issue 2, 2007, pp. 1-11.
“Empirical and Numerical Analyzes of Support Requirements for a Diversion Tunnel at the Boztepe Dam Site, Eastern Turkey” (Z. Gurocak, P. Solanki, and M. Zaman). Engineering Geology, Vol. 91, 2007, pp. 194-208.
“Effect of Anti-Strip Additives on Surface Free Energy Characteristics of Asphalt Binders for Moisture-Induced Damage Potential” (N. Wasiuddin, C.M. Fogle, M. Zaman, and E.A. O’Rear). ASTM Journal of Testing and Evaluation, Vol. 35, No. 11, 2007, pp. 36-44.
“Characterization of Thermal Degradation of Liquid Amine Anti-Strip Additives in Asphalt Binders Due to RTFO and PAV-Aging” (N. Wasiuddin, C.M. Fogle, M. Zaman, and E.A. O’Rear). ASTM Journal of Testing and Evaluation, Vol. 35, No. 4, 2007, pp. 387-394.
“A Comparative Laboratory Study of Sasobit® and Aspha-Min® in Warm Mix Asphalt.” (N. Wasiuddin, S. Selvamohan, M. Zaman, and M.L. Guegan). Transportation Research Record, Journal of the Transportation Research Board, 1998, 2007, pp. 82-88.
“Environmental Effects on Durability of Aggregates Stabilized with Cementitious Materials” (N.N. Khoury and M. Zaman). ASCE Journal of Materials in Civil Engineering, Vol. 19, No. 1, 2007, pp. 1-8.
″Laboratory and Field Assessment of Pile run Chat from the Tar Creek Superfund Site Stabilized with Class C Fly Ash and Cement Kiln Dust″ (N.N. Khoury, R.V. Teredesai, M. Zaman, and C.N. Khoury). International Journal of Geotechnical Engineering, Vol. 1, Issue 1, 2007, pp. 71-80.
“Characteristics of Chat-Asphalt for Road Base Application” (N.M. Wasiuddin, M. Zaman, R.W. Nairn and N. Kolothody). Journal of Solid Waste Technology & Management, Vol 32, No. 3, 2006, pp. 125-137.
“Durability Effect on Flexural Behavior of Cementitiously Stabilized Limestone Aggregate” (N.N. Khoury and M. Zaman). Journal of Testing and Evaluation, ASTM, Vol. 34, No. 3, 2006, pp. 167-175.
“Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements” (R.A. Tarefder, M. Zaman, R. Sisson, and C.-F. Ting). Journal of Testing and Evaluation, ASTM, Vol. 34, No. 1, 2006, pp. 31-41.
“Semi-Quantification of Cementing Products using X-Ray Diffraction Technique in Stabilized Aggregate” (N. Khoury, M. Zaman, and J.G. Laguros). Journal of X-Ray Science and Tech., Vol. 14, No. 1, 2006, pp. 39-54.
“Field and Laboratory Properties of Lime-Treated Cold In-Place Recycled Asphalt Pavements” (R.A. Tarefder, M. Zaman, R. Sisson and C.F. Ting). ASTM Journal of Testing and Evaluation, Vol. 34, No. 1, 2006, pp. 31-41.
“Development and Application of a Rut Prediction Model for Flexible Pavement” (R.A. Tarefder, M. Zaman, and L. White). Journal of Transportation Research Record, 2005.
“Analysis of Emulsion and Hot Asphalt Cement Chip Seal Performance” (D. Gransberg and M. Zaman). Journal of Transportation Engineering, ASCE, Vol. 131, No. 3, 2005, pp. 229-238.
“Neural Network Model for Asphalt Concrete Permeability” (R.A. Tarefder, L. White, and M. Zaman). Journal of Materials in Civil Engineering, ASCE, Vol. 17, No. 1, 2005, pp. 19-27.
“Modeling Fully Coupled Oil-Gas Flow in Dual-Porosity Medium” (R. Nair, Y. Abousleiman, and M. Zaman). International Journal of Geomechanics, ASCE, Vol. 5, No. 4, 2005, pp. 326-338.
“Simple Expert System for Evaluation of Pollution Potential from Land Application of Manure” (A.N.M. Ahsanuzzaman, M. Zaman, and R. Kolar). International Journal of Geomech., ASCE, Vol. 4, No. 4, 2004, pp. 285-295.
“Analysis of Inclined Boreholes in Poroelastic Media” (S. Ekbote, Y. Abousleiman, L. Cui, and M. Zaman). International Journal of Geomechanics, ASCE, Vo. 4, No. 3, 2004, pp. 178-191.
“Correlation Between Resilient Modulus, Moisture Variation and Soil Suction for Subgrade Soils” (N.N. Khoury, and M. Zaman). Journal of the Transportation Research Board, TRR No. 1874, 2004, pp. 99-107.
“A Finite Element Porothermoelastic Model for Dual-Porosity Media” (R. Nair, Y. Abousleiman, and M. Zaman). International Journal for Numerical and Analytic Methods in Geomechanics, Vol. 28, 2004, pp. 875-898, 2004.
“An Alternate Method to Determine Asphalt Content of Hot Mix Asphalt Using Volumetric Properties” (M.S. Shaheed, R.A. Tarefder, and M. Zaman). Journal of Testing and Evaluation, ASTM, Vol. 32, No. 4, 2004, pp. 322-333.
“A Laboratory and Statistical Evaluation of Factors Affecting Rutting” (R.A. Tarefder, M. Zaman, and K.A. Hobson). International Journal of Pavement Engineering, IJPE, Vol. 4, No. 1, 2003, pp. 59-68.
“Formulation of Mix Design and Asphaltic Encapsulation of Hydrocarbon Contaminated Soil,” (R.A. Tarefder, M.E., Ruckgaber, M. Zaman, M., and D. Patton). ASCE Journal of Materials in Civil Engineering, Vol. 15, No. 2, 2003, pp. 166-173.
“Stochastic Inversion and Prediction Applied to Concrete Overlay Systems.” (L.W. White and M. Zaman). Applied Math and Computation, Vol. 128, 2002, pp. 59-79.
“A Laboratory Assessment of Binders’ Contribution to Rutting Susceptibility” (R. Tarefder, M. Zaman and K. Hobson). International Journal of Pavement, Vol. 1, No. 2, 2002, pp. 36-47.
“Evaluating the CoreLokTM Measurement of Bulk Specific Gravity for Hot Mix Asphalt Samples” (R. Tarefder, M. Zaman and K. Hobson). ASTM Journal of Testing and Evaluation, Vol. 30, No. 4, 2002, pp. 274-282.
“Characteristics of Cold Processed Asphalt Millings and Cement-Emulsion Composite” (R. Issa, M. Zaman, G.A. Miller, and L.J. Senkowski). Transportation Research Record, TRR No. 1767, 2001, pp. 1-6.
“Coupling Elastic Models Through Interfacial Conditions with Application to Concrete Overlays” (L.W. White and M. Zaman). Applied Math and Computation, Vol. 123, 2001, pp. 187-204.
“A Simplified Model for Pavement Drainage” (L. White and M. Zaman). International Journal of Geomechanics, Vol. 1, 2001, pp. 65-82.
“Field and Laboratory Evaluation of Cement Kiln Dust as a Cement Stabilizer” (G.A. Miller and M. Zaman). Transportation. Research Record, TRR No. 1714, 2000, pp. 25-32.
“Cyclic Shear Strength of Soft Railroad Subgrade” (G.A. Miller, S.Y. Teh, M. Zaman and D. Li). Journal of Geotechnical and Geo-Environmental Eng., ASCE, Vol. 126, No. 2, 2000, pp. 139-147.
“A Model for Fluid Accumulation and Flow in a Three-Dimensional Porous Medium” (H. Li, L. White, and M. Zaman). Applied Math and Computation, Vol. 108, 2000, pp. 177-19.
“Durability Effects on Resilient Moduli of Stabilized Aggregate Base” (M. Zaman, J.-H. Zhu and J.G. Laguros). Transportation Research Record, TRR No. 1687, 1999, pp. 29-38.
“Resilient Modulus and Microstructure of Cement-Kiln-Dust Stabilized Base/Subbase Aggregate” (J.-H. Zhu, M. Zaman, and J.G. Laguros). Soils and Foundations, Vol. 39, No. 6, 1999, pp. 33-42.
“Stability of Boreholes in a Geologic Medium Including the Effects of Anisotropy” (D. Gupta and M. Zaman). Applied Math. And Mech., Vol. 20, No. 8, 1999, pp. 837-866.
“Building a Knowledge-Efficient Sanding Advisor” (M. Kanj, J.-C. Roegiers, and M. Zaman). Knowledge-Based Systems, Vol. 12, 1999, pp. 145-158.
“Effects of In Situ Stresses on Fluid Flow in Fractured Reservoirs” (F. Meng, M. Bai, M. Zaman, and J.-C. Roegiers). In Situ, Vol. 23, No. 2, 1999, pp. 107-130.
“Analytical Method for Analysis of Slope Stability” (J. Cao and M. Zaman). International Journal for Numerical and Analytical Methods in Geomech., Vol. 23, 1999, pp. 439-449.
“A Semi-Analytical Solution for a Two-Dimensional Capacitance Model in Solute Transport” (M. Bai, Z. Shu, J. Cao, M. Zaman and J.-C. Roegiers). Petroleum Science and Engineering Journal, Vol. 22, No. 2, 1999, pp. 275-295.
“Discussion on Resilient Modulus of Cohesive Soils” (J.-H. Zhu and M. Zaman). Journal of Geotech. And Geoenvironmental Engineering, ASCE, Vol. 124, No. 11, 1998, pp. 1155-1156.
“Modeling Soil Behavior with a Recurrent Neural Network” (J.-H. Zhu, M. Zaman, and S.A. Anderson). Canadian Geotech. Journal, Vol. 35, 1998, pp. 858-872.
“Variation of Resilient Modulus of Aggregate Bases and Its Influence on Pavement Performance” (P. Tian, M. Zaman, and J.G. Laguros). ASTM J. of Testing & Evaluation, Vol. 26, No. 4, 1998, pp. 329-335.
“Cracking Characteristics of Model CRC Pavements” (M.I. Haque, M. Zaman, and A.A. Soltani). Accepted for Publication in Transportation Research Record, TRR No. 1629, 1998, pp. 90-98.
“Gradation and Moisture Effects on Resilient Moduli of Aggregate Base” (T. Ping, M. Zaman, and J.G. Laguros). Transportation Research Record, TRR No. 1619, 1998, pp. 75-84.
“Acoustic-Velocity Signatures Associated with Rock Deformation Process” (T.E. Scott, M. Zaman, and J.-C. Roegiers). Journal of Petroleum Technology, Distinguished Author Series, 1998, pp. 70-74.
“Modeling Shearing Behavior of a Residual Soil with Recurrent Neural Network” (J.H. Zhu, M. Zaman, and S.A. Anderson). Int. J. For Num. & Anal. Met. In Geomech., Vol. 22, 1998, pp. 671-687.
“Fracture Toughness of a Soft Sandstone” (G.R. Krishnan, X.L. Zhao, M. Zaman, and J.-C. Roegiers). Int. Journal of Rock Mech. & Mining Science, Vol. 35, No. 8, 1998, pp. 695-710.
“A Simple Model for Fluid Accumulation and Flow in a Porous Medium” (L.W. White and M. Zaman). Applied Mathematics and Computation, Vol. 90, 1998, pp.181-203.
“Numerical Modeling of Stress-Dependent Permeability” (F. Meng, M. Bai, J. Cao, M. Zaman, and J-C. Roegiers). Int. Journal of Rock Mech. & Mining Sci., Vol. 34, No. 3-4, 1997, pp.446 (full paper appeared on CD).
“Applications of Time-Dependent Pseudo-3D Stress Analysis in Evaluating Wellbore Stability” (Y. Abousleiman, L. Cui, S. Ekbote, M. Zaman, J.-C. Roegiers, and A.H-D. Chang). International Journal of Rock Mech. & Mining Science, Vol. 34, No. 3-4, 1997, pp.421 (full paper appeared on CD).
Sanding: An Expert System Approach for Assessment and Control in Wells” (M. Kanj, M. Zaman, and J.-C. Roegiers). Journal of Energy Resources Tech., ASME, Vol. 119, No. 4, 1997, pp. 223-235.
Stress-Dependent Permeability Measurement Using the Oscillating Pulse Technique” (P. Suri, M. Azeemuddin, M. Zaman, A.R. Kukreti, and J.-C. Roegiers). Petroleum Science and Engineering, Vol. 17, 1997, pp. 247-264.
“Modeling Time Dependent Behavior of Pavement Drainage Using Linear System Identification and Neural Network Techniques” (M. Rahman, S.I. Sudharsan, K.K. Muraleetharan, and M. Zaman). Transp. Research Board, TRB 1582, 1997, pp. 34-41.
“Creep Constitutive Modeling of Rock Salt and Evaluation of Model Parameters Using Optimization Technique” (M. Zaman, M.I. Hossain, and M.O. Faruque). Indian Geotech. Journal, Vol. 12, No. 6, 1996, pp. 761-780.
“Dynamic Response of Cable-Stayed Bridges to Moving Vehicles Using the Structural Impedance Method” (M. Zaman, A. Khanna, and M.R. Taheri). Applied Mathematical Modeling, Vol. 20, 1996, pp. 887-889.
“Creep Constitutive Modeling of an Aluminum Alloy Under Multiaxial and Cyclic Loading” (M.O. Faruque, M. Zaman, and M.I. Hossain). International J. of Plasticity, Vol. 12, No. 6, 1996, pp. 761-780.
“Micro Mechanisms of Pore Collapse in Limestone” (S. Mowar, M. Zaman, D.W. Stearns and J.-C. Roegiers). Journal of Petroleum Science and Eng., Vol. 15, No. 2/4, 1996, pp. 221-235.
“Assessment of Computer Programs for Analysis of Flexible Pavement Structure” (D.H. Chen, M. Zaman, J.G. Laguros and A. Soltani). Transp. Research Record, No. 1482, 1995, pp. 123-133.
“Changes in Acoustic Velocity During Pore Collapse of Rocks” (T.E. Scott, M. Azeemuddin, M. Zaman, and J.-C. Roegiers), ISRM News Journal, Vol. 3, No. 1, 1995, pp. 14-17.
“Effects of a Moving Aircraft and Temperature Differential on Response of Rigid Pavements” (M.R. Taheri and M. Zaman). Computers and Structures, Vol. 57, No. 3, 1995, pp. 503-511.
“A Contact Element Model for the Dynamic Analysis of Jointed Concrete Pavements” (M. Zaman and A. Alvappillai). ASCE Transp. Eng. Div., Vol. 121, No. 5, Sept./Oct., 1995, pp. 425-433.
“Static and Dynamic Analysis of Concrete Pavements Including Thermal Warping Effects” (M. Zaman, M.R. Taheri and V. Khanna) Arabian Journal of Science and Engineering, Vol. 20, No. 3, 1995, pp. 433-466.
“Creep Modeling of Rock Salts for Geoenvironmental Application” (M.I. Hossain, M.O. Faruque and M. Zaman). ASME Journal of Energy Resources Technology, Vol. 117, No. 2, 1995, pp. 108-114.
“Characterization of Base/Subbase Materials Under Repetitive Loading” (D.H. Chen, M. Zaman and J.G. Laguros). ASTM Journal of Testing and Evaluation, Vol. 23, No. 3, 1995, pp. 180-188.
“Resilient Moduli of Aggregate Materials: Variability Due to Testing Procedure and Aggregate Type” (D.H. Chen, M. Zaman and J.G. Laguros). Transportation Research Record, No. 1462, 1995, pp. 57-64.
“Resilient Moduli of Granular Materials and Their Correlations with Other Engineering Properties” (M. Zaman, D.H. Chen and J.G. Laguros). ASCE Transp. Div. Journal, Vol. 120, No. 6, 1994, pp. 967-988.
“Application of Infinite Elements to Seepage Analysis in Geotechnical Perspective” (M. Zaman and D. Bhat). Discussion of paper by Y. Honjo and G. Pokharel, Soils and Foundations, Vol. 34, No. 2, 1994, pp. 116-117.
“A FE Model for Ekofisk Field Subsidence” (A. Abdulraheem, M. Zaman and J.-C. Roegiers), J. of Petroleum Science and Eng., Vol. 10, 1994, pp. 299-310.
“Pore Collapse Behavior of Weakly Cemented and Porous Rocks” (M. Zaman, J.-C. Roegiers, A. Abdulraheem and M. Azeemuddin) ASME Journal of Energy Resources Technology, Vol. 116, 1994, pp. 97-103.
“A Two Characteristic Model for Cohesionless Soil and Its Calibration Using Optimization” (A. Abdulraheem, M.O. Faruque, and M. Zaman). Int. J. of Plasticity, Vol. 10, No. 3, 1994, pp. 309-326.
“Surface Subsidence Prediction by Nonlinear Finite Element Analysis” (Y. Najjar and M. Zaman). ASCE Journal of Geotechnical Engineering, Vol. 119, 1993, pp. 1790-1804.
“Analysis of Fluid Storage Tanks Including Foundation-Superstructure Interaction” (A.R. Kukreti, M.M. Zaman and A. Issa). Applied Mathematical Modelling, Vol. 17, 1993, pp. 618-631.
“Numerical Simulation of a Compacting Reservoir” (A. Abdulraheem, M. Zaman, and J.-C. Roegiers). Int. J. of Rock Mech. and Mining Sciences, Vol. 30, No. 7, 1993, pp. 1299-1302.
“Numerical Modeling of Ground Subsidence due to Mining” (Y.M. Najjar and M. Zaman). International Journal of Rock Mech. and Mining Sciences, Vol. 30, No. 7, 1993, pp. 1445-1448.
“Dynamic Response of Concrete Pavements Resting on Viscoelastic Foundation to Moving Loads” (A. Alvappillai, M. Zaman, and M.R. Taheri). European Journal of Mechanics, A/Solids, Vol. 12, No. 1, 1993, pp. 79-93.
“Dynamic Analysis of Concrete Pavements Resting on a Two-Parameter Medium” (M. Zaman, A. Alvappillai and M.R. Taheri). Int. J. for Numerical Methods in Engineering, Vol. 36, 1993, pp. 1465-1486.
“Effects of Cap Thickness and Pile Inclination on the Response of a Pile Group Foundation by a Three-Dimensional Nonlinear Finite Element Analysis” (M. Zaman, Y.M. Najjar and A. Muqtadir). Computers and Geotechnics, Vol. 15, 1993, pp. 65-86.
“Modeling of Stress-Strain Behavior of Plain Concrete Using a Plasticity Framework” (M. Zaman, Y.M. Najjar and M.O. Faruque). Materials and Structures Journal, Vol. 26, 1993, pp. 129-135.
“On Modeling Stress-Strain and Dilatant Behavior of Cohesionless Soil (M.O. Faruque, and M. Zaman). Indian Geotech. Journal, Vol. 22, No. 3, 1992, pp. 175-195.
“Finite Element Algorithm for Jointed Concrete Pavements Subjected to Moving Aircraft.” (A. Alvappillai, M. Zaman and J.G. Laguros). Computers and Geotechnics, Vol. 14, 1992, pp. 121-147.
“A Mixed-Variational Approach for the Analysis of Circular Plate-Elastic Halfspace Interaction” (M.O. Faruque and M.M. Zaman). Comp. Met. in Applied Mech. and Engr., Vol. 92, 1991, pp. 75-86.
“Dynamic Response of Thick Plates on Viscoelastic Foundation to Moving Loads” (M. Zaman, M.R. Taheri and A. Alvappillai). Int. J. for Numerical and Anal. Methods in Geomech., Vol. 15, 1991, pp. 627-647.
“On the Concept of Characteristic States of Cohesionless Soil and Constitutive Modeling” (M.O. Faruque and M. Zaman). Soils and Foundations, Vol. 31, No. 2, 1991, pp. 111-121; Closure: Vol. 33, No. 1, 1993, pp. 209-210.
“Mixed-Variational Approach for Restrained Plate-Half-space Interaction” (M. Zaman and M.O. Faruque). Journal of Engr. Mech. Div., ASCE, Vol. 117, No. 8, 1991, pp. 1755-1770.
“Analysis of the Interaction Between a Moderately Thick Plate and an Isotropic Elastic Halfspace by Using a Mixed-Variational Principle” (M.O. Faruque and M.M. Zaman). Soils and Foundations, Vol. 31, No. 1, 1991, pp. 73-82.
“Analysis of Foundation-Elastic Halfspace Interaction Using a Mixed-Variational Approach” (M.M. Zaman, N. Uddin and M.O. Faruque). Soils and Foundations, Vol. 31, No. 1, 1991, pp. 27-38.
“Consolidation Settlements of Bridge Approach Foundation” (M.M. Zaman, A. Gopalasingam and J.G. Laguros). Journal of Geotech. Engineering Div., ASCE, Vol. 117, No. 2, 1991, pp. 219-240.
“Analysis of Moderately Thick Restrained Circular Plates Resting on an Isotropic Elastic Halfspace” (M.M. Zaman, M.O. Faruque and A. Mahmood). Applied Math. Modeling, Vol. 14, 1990, pp. 352-361.
“Dynamic Response of Concrete Pavement to Moving Aircraft” (M.R. Taheri, M.M. Zaman and A. Alvappillai). Applied Mathematics Modeling, Vol. 14, 1990, pp. 562-575.
“Elasto-Plastic Constitutive Modeling of Plain Concrete and an Optimization Procedure for Parameter Evaluation” (Y.M. Najjar, M.M. Zaman and M.O. Faruque). Computers and Geotechnics, Vol. 9, 1990, pp. 185-208.
“Creep Response of 2618-T61 Aluminum Under Multiaxial Loading” (I.U. Mahmood, M.O. Faruque and M.M. Zaman). ASME, Journal of Applied Mechanics, Vol. 56, No. 3, 1989, pp. 514-518.
“Analysis of Tank-Foundation-Halfspace Interaction Using an Energy Approach” (M.M. Zaman and N. Koragappa). Applied Mathematical Modelling, Vol. 13, 1989, pp. 66-78.
“Analysis of Cylindrical Storage Tank Foundation Interaction Using Finite Element Method” (M.M. Zaman and I.U. Mahmood). Indian Geotech. Journal, Vol. 18, No. 4, 1988, pp. 365-384.
“Efficient Solution for Finite Element Formulation of Flow of Immiscible Fluids in Compressible Heterogeneous Irregular Shaped Reservoirs” (A.R. Kukreti, M.M. Zaman, F. Civan and Y. Rajapaksa). Petroleum Engineering and Science, Vol. 1, 1988, pp. 277-294.
“Analysis of Circular Plate-Elastic Halfspace Interaction Using an Energy Approach” (M.M. Zaman, A.R. Kukreti and A. Issa). Applied Mathematical Modeling, Vol. 12, 1988, pp. 285-292.
“On Modeling of Steady State and Transient Creep of Polycrystalline Solids” (M.O. Faruque and M.M. Zaman). Acta Mechanica, Vol. 71, 1988, pp. 115-136.
“A Cylindrical Tank-Foundation-Halfspace Interaction Using an Energy Approach” (A. Issa and M.M. Zaman). Computer Methods in Applied Mechanics and Eng., Vol. 56, 1986, pp. 47-60.
“Cyclic Testing and Modelling of Interfaces” (C.S. Desai, E.C. Drumm and M.M. Zaman). Journal of Geotechnical Eng. Div., ASCE, Vol. 111, No. 6, 1985, pp. 794-815.
“A Variational Approach for the Analysis of Square and Rectangular Plates Resting in Smooth Contact with an Isotropic Elastic Halfspace” (M.M. Zaman and M.O. Faruque). Soils and Foundations, Vol. 25, No. 1, 1985, pp. 15-26.
“An Interface Model for Dynamic Soil-Structure Interaction” (M.M. Zaman, C.S. Desai and E.C. Drumm). Journal of Geotechnical Eng. Div., ASCE, Vol. 110, No. GT9, 1984, pp. 1257-1273.
“A Hyperelastic Model for Granular Materials Under Monotonic Loading” (M.M. Zaman, G. Ayala and T. Kuppusamy). Indian Geotechnical Journal, Vol 14, No. 3, 1984, pp. 163-182.
“Thin-Layer Element for Interfaces and Joints” (C.S. Desai, M.M. Zaman, J.G. Lightner and H.J. Siriwardane). International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 8, No. 1, 1984, pp. 19-43.
“New Models for Rock Joints and Interfaces” (F.E.Heuze and T.G. Barbour). Discussion, Journal of Geotechnical Eng. Div., ASCE, Vol. 109, No. 7, 1982, pp. 1009-1011.