Refereed Conference Papers

  1. “Assessment of Durability and Strength of Recycled Concrete Aggregate (RCA) for Use in Pavement Base Construction.” (Arevalo, P. F.C., Ali, S. A., Zaman, M., Vellingiri, A., Hobson, K. R., Rojas-Pochyla, B.). International Airfield and Highway Pavements Conference, held on June 14-17, 2023, Austin TX.
  2. “Estimating Optimum Rejuvenator Rate for Asphalt Recycling Based on Binder Rheological Properties.” (Hobson, K. R., Ali, S. A., Vivanco, D., Ghos, S., Zaman, M.). International Airfield and Highway Pavements Conference, held on June 14-17, 2023, Austin TX.
  3. “Repair Evaluations of Depressed Transverse Cracks in Asphalt Pavements.” (Ghos, S., Hobson, K., Chen, D.-H., Ali, S. A., Zaman, M., Behm, M., Wang, K., Pittenger, D.). Int’l. Airfield and Highway Pavements Conf., held on June 14-17, 2023, Austin TX.
  4. “Subsurface Investigation using Traffic Speed Deflection Device (TSDD) in Oklahoma.” (Mendez, M. L., Ali, S. A., Hobson, K. R., Zaman, M., Scullion, T.). International Airfield and Highway Pavements Conference, held on June 14-17, 2023, Austin TX.
  5. “Comparative Evaluation of Fracture Tests for Characterizing Fatigue Cracking Resistance of Asphalt Mixes.” (Sagar, G., Ali, S. A., Zaman, M., Hobson, K. R.). 102nd TRB Annual Meeting, held in Washington, D.C., Jan. 8-12, 2023.
  7. “Pavement Quality Evaluation using Intelligent Compaction (IC) Technology: Overview of Some Case Studies in Oklahoma” (Ghos, S., Elaryan, A. E., Ali, S. A., Zaman, M., Rahman, M. A.). Los Angeles, California, Oct. 28-29, 2022,International Conference on Construction Materials and Civil Engineering, 2022.
  8. “Evaluation of Strain Recovery and Stress Sensitivity of Asphalt Binders Containing Warm-Mix Asphalt Additive and Anti-stripping Agent” (Rani, S., Ghabchi, R., Zaman, M., Ali, S. A.). Torino, Italy, Aug. 30-Sept. 2, Challenges and Innovations in Geomechanics: Proceedings of the 16th International Conf. of IACMAG, Springer International Vol. 3, 11-18 DOI: DOI: 10.1007/978-3-031-12851-6_2, 2022.
  9. “Evaluation of Stiffness and Fatigue Cracking of Post-Consumer Recycled (PCR) Plastic-Modified Asphalt Mixes” (Ghos, S., Ali, S. A., Zaman, M., Cancino, P.). Seattle, Washington, International Conference on Transportation Development, ASCE, May 31-June 3, 2022 DOI: https://doi.org/10.1061/9780784484357.018, 2022.
  10. “Effectiveness of Using Polymer-Modified Asphalt Binders in Enhancing Fatigue Life of Asphalt Mixes Containing RAS and RAP” (Ghabchi, R., Zaman, M., Singh, D., Barman, M.),International Conference of the IACMAG, Springer, Cham, 213-219, 2021.
  11. “Application of Intelligent Compaction (IC) as a Quality Control Tool: An Oklahoma Experience” (Rahman, M. A., Zaman, M., Gerard, B., Shawn, J., Ali, S. A., Hobson, K. R.). 16th IACMAG (online), Torino, Italy, May 5-8, 2021, DOI:10.1007/978-3-030-64514-4_22, 2021.
  12. “Relationships between Compressive and Splitting Tensile Strengths of Cast and Core High-Strength Concrete Cylinders” (Campos, R., Mendez Larrain, M., Zaman, M., Pozades, V.). Nanchang, China, July 19-21, 2021, GeoChina 2021, Springer International Publishing, Smart and Green Solutions for Civil Infrastructures Incorporating Geological and Geotechnical Aspects.
  13. “Evaluation of Stripping Resistance of Organoclay-modified Asphalt Binder and Aggregate Systems Using an Optical Contact Angle Analyzer” (Hossain, Z., Bairagi, B., Zaman, M., Bulut, R., Sumpter, B.). Nanchang, GeoChina 2021 Conference, held in Nanchang, China, July 19-21, 2021, 26 pages DOI: https://doi.org/10.1007/978-3-030-79647-1_5.
  14. “Application of high-resolution GPR for Assessing and Characterizing Potential Damage Zones in Oklahoma’s Roads” (Behm, M., Zaman, M., Ali, S. A., Hobson, K. R., Ratre, P., Dangawal, D.). Golden, Colorado,18th International Conference on Ground Penetrating Radar, Society of Exploration Geophysicists, June 14-19, pp. 124-127, 2020.
  15. “Rutting Performance of PPA-Modified Binders Using Multiple Stress Creep and Recovery (MSCR) Test” (Rani, S., Ghabchi, R., Zaman, M., Ali, S. A.), Springer, Singapore, Advances in Computer Methods and Geomechanics, 607-616, 2020.
  16. “Sensitivity of Pavement MED Input Parameters for Characterization of Cracking in Pavements in Oklahoma” (Ghos, S., Ali, S. A., Zaman, M., Hobson, K. R.). Seattle, Washington, International Conference on Transportation and Development 2020, May 26-29, pp. 296-307 DOI: doi.org/10.1061/9780784483183.028, 2020.
  17. “Laboratory Characterization of Moisture-Induced Damage Potential of Asphalt Mixes Using Conventional and Unconventional Performance-Based Tests” (Ali, S. A., Ghabchi, R., Zaman, M., Rani, S., Rahman, M. A.). 98th Annual Meeting of Transportation Research Board, 2019.
  18. “DSC-Based Model for Growth of Calcite BioCemented Sand” (Zaman, M., Xiao, Y., Desai, C. S.). International IACMAG Symposium, IIT-Gandhinagar, March 5-7, 2019.
  19. “Fatigue and Low-Temperature Cracking Performance of Asphalt Mixes Containing RAP and RAS” (Zaman, M., Ali, S. A., Ghabchi, R., Singh, D. V., Barman, M.).  Ahmadabad, India, International IACMAG Symposium IIT Ghandinagar, Mar 5-7, 2019.
  20. “Rutting Performance of PPA-Modified Binders using Multiple Stress Creep and Recovery (MSCR) Test” (Rani, S., G, R., Zaman, M., Ali, S. A.).  Ahmadabad, India, March 5-7, 2019, IACMAG Symposium.
  21. “Prediction of dynamic modulus of hot mix asphalts with reclaimed asphalt pavement” (Hossain, Z., Zaman, M.). 15th World Conference on Transportation Research, held on May 26-31, 2019, Mumbai, India.
  22. “Effect of Polyphosphoric Acid on Stress Sensitivity of Polymer-Modified and Unmodified Asphalt Binders” (Rani, S., Ghabchi, R., Zaman, M., Ali, S. A.). 2019 International Airfield and Highway Pavements Conference, Chicago, Illinois, July 21-24, 2019.
  23. “Fatigue and Low-Temperature Cracking Performance of Asphalt Mixes Containing RAP and RAS” (Zaman, M., Ali, S. A., Ghabchi, R., Singh, D. V., Barman, M.).International IACMAG Symposium, held at IIT Ghandinagar, March 5-7, 2019.
  24. “Rutting Performance of PPA-Modified Binders using Multiple Stress Creep and Recovery (MSCR) Test” (Rani, S., G, R., Zaman, M., Ali, S. A.). IACMAG Symposium, held at Ahmadabad, India on March 5-7, 2019.
  25. “Use of Intelligent Compaction in Detecting and Remediating Under-Compacted Spots during Compaction of Asphalt Layers” (Barman, M., Imran, A., Nazari, M., Commuri, S., Zaman, M.). 5th GeoChina International Conference, Hangzhou, China, 2018.
  26. “Semi-Circular Bending (SCB) Test on Lab-Produced, Plant-Produced, and Field Warm Mix Asphalts” (Arshadi, A., Ghabchi, R., Ali, S. A., Barman, M., Zaman, M., Commuri, S.). 97th Annual Meeting, Transportation Research Board, Washington, D.C., CD ROM DOI: Paper No. 18-04797, 2018.
  27. “Feasibility of Using XRF for Assessment of Surface Free Energy Components of Asphalt binder” (Ali, S. A., Ghabchi, R., Rani, S., Rahman, M. A., Zaman, M.). 5th GeoChina International Conference, Hangzhou, China, 2018.
  28. “Evaluation of Rutting and Cracking Resistance of Foamed Warm Mix Asphalt Containing RAP” (Rahman, M. A., Arshadi, A., Ghabchi, R., Ali, S. A., Zaman, M.). 5th GeoChina International Conference, Hangzhou, China, 2018.
  29. “Impact of Anti-stripping Agents on Laboratory Performance of Asphalt Mixes” (Rani, S., Ghabchi, R., Ali, S. A., Zaman, M.).5th GeoChina International Conference, HangZhou, China, 2018.
  30. “Mechanistic Evaluation of Effect of PPA on Moisture-induced Damage using SFE and XRF” (Ali, S. A., Ghabchi, R., Zaman, M., Steger, R., Rani, S., Rahman, M. A.). ASCE International Conference on Transportation & Development (ICTD 2018), Philadelphia, Pennsylvania, July 15-18, 2018.
  31. “Characterization of Effect of Polymer Modification, Poly-Phosphoric Acid and Aging on Asphalt Binder Using X-ray Diffraction (XRD)” (Ali, S. A., Ghabchi, R., Rani, S., Zaman, M.). 96th Annual Meeting, Transportation Research Board (TRB), Washington, D.C., Jan. 8-12, 2017.
  32. “A Novel Approach for Fatigue Performance Characterization of Asphalt Mixes Using Indirect Tension Test Data” (Barman, M., Ghabchi, R., Singh, D., Zaman, M., Commuri, S.). Transportation Research Board 96th Annual Meeting, CD-ROM Publication, Washington, D.C., Jan. 8-12, 2017.
  33. “Contribution of Different Structural Layers to Pavement Rutting: A Case Study through Forensic Investigation of a Test Section on Interstate 35” (Hossain, N., Singh, D., Zaman, M., Timm, D., Solanki, P.). Transportation Research Board 96th Annual Meeting, CD-ROM Publication (17-02600), Washington, D.C., Jan. 8-12, 2017.
  34. “Influence of Chemical Stabilization on Flexural Fatigue Performance of Subgrade Soil” (Nazari, M., Ghabchi, R., Zaman, M., Commuri, S.). Proc. Geotechnical Frontiers, ASCE, Orlando, Florida, March 12-15, 2017.
  35. “Rutting Susceptibility Evaluation of RAP-Modified Asphalt using MSCR Method” (Ali, S. A., Ghabchi, R., Rani, S., Zaman, M., Parker, C.).15th International Conference of the International Association for Computer Methods and Advances in Geomechanics, Wuhan, China, Oct. 20-23, 2017.
  36. “Effects of Different Types of Evotherm Warm Mix Additive on Performance Grade and Moisture-Induced Damage Potential of Asphalt Binder” (Rani, S., Ghabchi, R., Ali, S. A., Zaman, M., O’Rear, E. A.).International Conference on Highway Pavements & Airfield Technology, Philadelphia, Pennsylvania, Aug. 27-30, 2017, pp. 189-200.
  37. “Effect of Warm-Mix Additive on Interfacial Energy of an Asphalt Binder and a Granite Aggregate” (Rani, S., Ghabchi, R., Ali, S. A., Zaman, M., O’Rear, E. A., Hobson, K.).15th International Conference of the International Association for Computer Methods and Advances in Geomechanics, Wuhan, China, 2017.
  38. “A Laboratory Study of Rutting Susceptibility of Asphalt Mixes Containing High RAP Content Using Rheological and Performance-based Test Methods” (Ali, S. A., Ghabchi, R., Rani, S., Zaman, M., Parker, C.).International Conference on Highway Pavements & Airfield Technology, Philadelphia, Pennsylvania, Aug. 27-30, 2017.
  39. “Viability Assessment of the Use of Ground Tire Rubber (GTR) as a Modifier in Asphalt Binders” (Hossain, Z., Bairgi, B., Zaman, M., O’Rear, E.).95th Annual Meeting of Transportation Research Board, Compendium Paper, Jan. 10-14, 2016.
  40. “Evaluation of Static Contact Angles and Moisture Resistance of Organoclay-Modified Asphalt Binder” (Hossain, Z., Bairagi, B., Zaman, M., Bulut, R., Sumpter, B.). 95th Annual Meeting of Transportation Research Board, Washington, D.C., No. Paper #16-2566, Jan. 10-14, 2016.
  41. “Evaluation of Moisture Susceptibility of Nano-Modified Asphalt Binders” (Hossain, Z., Bairgi, B., Zaman, M., Bulut, R.). 2016 Geo-Chicago, Chicago, Illinois, pp. 477-487.
  42. “Sensitivity of Axle Load Spectra on Performance of a Flexible Pavement Using Mechanistic Empirical Pavement Design Guide” (Hossain, N., Singh, D., Zaman, M.). Proc. TPMDC, IIT-Bombay, Mumbai, Dec. 19-21, 2016.
  43. “Evaluation of Moisture-Induced Damage of an Asphalt Binder Modified with a Wax-Based Additive” (Ali, S. A., Ghabchi, R., Rani, S., Zaman, M.). 12th Transportation Planning and Implementation Methodologies for Developing Countries (TPMDC) IIT-Bombay, Mumbai, December 19-21, 2016.
  44. “Evaluation of Chemical Hardening Process to Inhibit Aggregate Abrasion and Polishing” (Zaman, M., Pittenger, D. and Cumberpatch, L.O. 94th Transportation Research Board Annual Meeting held in Washington, D.C. on January 12-16 (Paper #15-0378), 2015.
  45. “A 2-Dimensional Dynamical Model of Asphalt-Roller Interaction During Vibratory Compaction” (Imran, S., Commuri, S., and Zaman, M.). Proceedings of the 12th International Conference on Informatics in Control, Automation and Robotics, pp. 533-540, Colmar, Alsace, France, July 21-23, 2015.
  46. “Evaluation of Moisture Susceptibility and Healing Properties of Nanoclay-Modified Asphalt Binders) (Hossain, Z., Zaman, M., Hawa, T., and Saha, M.). International Foundations Congress and Equipment Expo
    (IFCEE 2015), held in San Antonio, Texas on March 17-21, 2015, pp. 339-348.
  47. “Guidelines for Implementation of the Multiple Stress Creep Recovery (MSCR) Test Method” (Hossain, Z., Zaman, M., Ghosh, D. and Hobson, K.). 94th Transportation Research Board Annual Meeting, Washington, D.C., January 12-16, 2015. (Paper #15-4318)
  48. “Intelligent Compaction of Stabilized Subgrade of Flexible Pavement” (Barman, M., Imran, S. A., Nazari, M., Commuri, S. and Zaman, M.). Int’l Foundations Congress and Equipment EXPO, IFCEE-2015, San Antonio, Texas. March 17-21, 2015, Published in the ASCE Geotechnical Special Publication No. 256, IFCEE 2015 © ASCE 2015, pp 2554-2566.
  49. “A Comparative Evaluation of Three Different Fatigue Test Methods of Asphalt Mixes.” (2015).  Barman, M., Ghabchi, R., Singh, D., Zaman, M. and Commuri, S.3rd Conference on Transp. Research Group of India (CTRG), held in Kolkata, Dec. 17-20.
  50. “Intelligent Compaction of Stabilized Subgrade of Flexible Pavement,” Barman, M., Imran, S. A., Nazari, M., Commuri, S. and Zaman, M.  Internationall Foundations Congress and Equipment Expo, IFCEE-2015, San Antonio, Texas. March 17-21, 2015, Published in the ASCE Geotechnical Special Publication No. 256, IFCEE 2015 © ASCE 2015, pp 2554-2566.
  51. “Guidelines for Implementation of the Multiple Stress Creep Recovery (MSCR) Test Method.” Hossain, Z., Zaman, M., Ghosh, D. and Hobson, K.  94th Transportation Research Board Annual Meeting, held in Washington, D.C. on January 12-16 (Paper #15-4318).
  52. “Evaluation of Moisture Susceptibility and Healing Properties of Nanoclay-Modified Asphalt Binders,” Hossain, Z., Zaman, M., Hawa, T., and Saha, M. (2015).  International Foundations Congress and Equipment EXPO (IFCEE 2015), pp. 339-348.
  53. “Prediction of Stripping Resistance of Nanoclay-modified Asphalts Using Their Surface Chemistries,” Hossain, Z., Bairgi, B., Zaman, M., Bulut, R. (2015). Submitted to 2016 Geo-Chicago, Chicago, Illinois, August 14-18, 2016.
  54. “A 2 Dimensional Dynamical Model of Asphalt-Roller Interaction During Vibratory Compaction.” Imran, S., Commuri, S., and Zaman, M. (2015). Proceedings of the 12th International Conference on Informatics in Control, Automation and Robotics, pp. 533-540, Colmar, Alsace, France.
  55. “Evaluation of Chemical Hardening Process to Inhibit Aggregate Abrasion and Polishing.” Zaman, M., Pittenger, D. and Cumberpatch, L. (2015), 94th Transportation Research Board Annual Meeting, held in Washington, D.C. on January 12-16 (Paper #15-0378).
  56. “Application of Intelligent Compaction Technology for Estimation of Effective Modulus for A Multilayered Asphalt Pavement,” Singh, D.V., Beainy, F., Zaman, M., Commuri, S. (2014). GSP 249: Recent Developments in Evaluation of Pavements and Paving Materials, Geo-Hubei 2014, Edited by R.A. Tarefder, J. Hu, M. Zaman, and D.H. Chen, ISBN (print): 978-0-7844-7849-3, ASCE.
  57. “Comparative Analysis of Microsurfacing and Slurry Seal for Rut Filling.” Pittenger, D., Granberg, D., Zaman, M., and Riemer, C. (2014). CD ROM publication (Paper #14-0756), 93rd Research Board Annual Meeting, held in Washington, D.C. on January 12-16.
  58. “Continuous Monitoring of Subgrade Stiffness during Compaction,” Imran, S.A., Barman, M., Nazari, M., Commuri, S., Zaman, M. (2014). Paper ID # 233, 11th International Conference on Transportation Planning and Implementation Methodologies for Developing Countries, TPMDC, IIT Bombay, India, December 10-12.
  59. “Dynamical Model of Asphalt-Roller Interaction During Compaction,” Imran, S.A., Beainy, F., Commuri, S., and Zaman, M. (2014). ICINCO – 11th International Conference on Informatics in Control, Automation and Robotics, Paper ID# 210, Vienna, Austria, Sept. 1-3.
  60. “Evaluation of Moisture Susceptibility of Nanoclay-Modified Asphalt Binders,” Hossain, Z., Zaman, M., Saha, M., and Hawa, T. (2014).GSP 244: Application of Nanotechnology in Pavements, Geological Disasters, and Foundation Settlement Control Technology, Geo-Hubei 2014, Edited by D. Singh, L.F. Walubita, J. Oh, and K. Li, ISBN: 978-0-7844-7844-8, ASCE, pp. 1-8.
  61. “Evaluation of Viscosity and Rutting Properties of Nanoclay-modified Asphalt Binders,” Hossain, Z., Zaman, M., Saha, M.C., and Hawa, T. (2014). Geo-Congress on Geo-Characterization and Modeling for Geo-sustainability, held in Atlanta, GA on Feb. 23-26 (10 pages).
  62. “Local Calibration MEPDG Rut Models: Oklahoma’s Experience from an Instrumented Pavement Section.” Hossain, N., Singh, D., Zaman, M. and Rassel, S.M. (2014). 14th International Conference Int. Assoc. Comp. Methods and Advances in Geomech. (IACMAG), pp. 135-140.
  63. “Effects of RAP Binder on Moisture-Induced Damage Potential of Asphalt Mixes with Limestone Aggregates,” Ghabchi, R., Singh, D. V., and Zaman, M. (2014). 14th International Conference Int. Assoc. Comp. Methods and Advances in Geomech. (IACMAG) held on Sept. 22-25 at Kyoto, Japan, pp. 453–458.
  64. “Moisture Susceptibility Evaluation of Nano-sized Hydrated Lime-Modified Asphalt-Aggregate Systems Based on Surface Free Energy Concept.” CD ROM publication (Paper #14-???), Diab, A., You, Z., Hossain, Z., and Zaman, M. (2014). 93rd Transportation Research Board Annual Meeting, held in Washington, D.C. on January 12-16.
  65. “Application of Intelligent Compaction Technique in Real-Time Evaluation of Compaction Level During Construction of Subgrade.” Barman, M., Nazari, M., Imran, S.A., Commuri, S., and Zaman, M. (2014). CD ROM publication (Paper #14-5183), 93rd Transportation Research Board Annual Meeting, held in Washington, D.C. on January 12-16.
  66. “Continuous Monitoring of Subgrade Stiffness During Compaction,” Barman, M., Nazari, M., Imran, S.A., Commuri, S., and Zaman, M. (2014). 11th Planning and Impl. Methodologies for Developing Countries (TPMDC), held on Dec. 10-12 in Mumbai, India.
  67. “Evaluation of Fatigue Performance of Asphalt Mixes Using Semi-Circular Bend and Four Point Beam Fatigue Test Methods,” Barman, M., Ghabchi, R., Singh, D. V., Zaman, M., Commuri, S., and Hobson, K. (2014). 14th International Conference Int. Assoc. Comp. Methods and Advances in Geomech. (IACMAG) held on Sept. 22-25 at Kyoto, Japan: pp. 459–464.
  68. “Effect of Freeze-Thaw Cycles on Performance of Stabilized Subgrade,” Solanki, P., Zaman, M., and Khalife, R. (2013), GeoCongress 2013, Sound Geotechnical Research to Practice, Geotechnical Special Publication Honoring the Contributions of Robert D. Holtz, March 3-6, 2013, San Diego, California, pp. 567-581.
  69. “Mechanistic Characteristics of Hot Mix Asphalt Containing Reclaimed Asphalt Pavement,” Solanki, P., Zaman, M., Adje, D., and Hossain, Z. (2013). 8th International Conf. on Road and Airfield Pavement Tech. (ICPT 2013), July 14-18, 2013, Taipei, Taiwan, 9 pages.
  70. “Comparison of Morphological Properties of Different Types of Coarse Aggregates,” Singh, D.V., Zaman, M., Commuri, S. (2013). Air Field and Highway Pavements Conference, 2013, Edited by Imad L. Al-Qadi and Scott Murrell, (ISBN: 978-0-7844-1300-5), Transportation and Development Institute, held in Los Angeles, CA. doi: 10.1061/9780784413005.106.
  71. “Evaluation of Rutting and Moisture Susceptibility of Nanoclay-Modified Asphalt Binders.”  Hossain, Z., Zaman, M., and Saha, M. (2013), 17th IRF World Meeting & Exhibition, held in Riyadh, Saudi Arabia, November 10-14, 2013, 13 pages.
  72. “Viscoelastic Properties of Asphalt Binders Recovered from Reclaimed Asphalt Pavement.” Hossain, Z., Zaman, M., and Solanki, P. (2013), 17th IRF World Meeting & Exhibition, held in Riyadh, Saudi Arabia, November 10-14, 2013, 13 pages.
  73. “Mechanistic Empirical Pavement Design Guide Input Parameters for Unbound Aggregates in Oklahoma,” Hossain, Z., Zaman, M., and Doiron, C. (2013), 2nd IACGE Int. Conf. on Geotech. and Earthquake Engineering, held in Chengdu, China on October 25-27, 2013, 8 pages.
  74. “Development of Field Rut Prediction Models from an Instrumented Test Section on Interstate-35” Hossain, N., Solanki, P., Muraleetharan, K. K., Zaman, M., and Singh, D. (2013), (CD ROM, Paper No. 13-3656), Research Board 92nd Annual Meeting, held in Washington, D.C., January 13-17, 2013, 17 pages.
  75. “Application of Asphalt-Aggregates Interfacial Energies to Evaluate Moisture-Induced Damage of Warm Mix Asphalt.” Ghabchi, R., Singh, D., Zaman, M., and Tian, Q. (2013).  2nd Conference of Transportation Research Group of India (CTRG), held in Agra, India on December 12-15, 2013, 10 pages.
  76. “A Laboratory Study of Warm Mix Asphalt for Moisture Damage Potential Using Surface Free Energy Method.” Ghabchi, R., Singh, D., Zaman, M. and Tian, Q. (2013), Airfield and Highway Pavement Conference: Sustainable and Efficient Pavements, Transportation & Development Institute of ASCE, held in Los Angeles, CA on June 9-12, 2013, pp. 54-63.
  77. “Pullout Performance of Geogrids with Different Junction Strength.” Mahmood T., Hatami K., Ghabchi, R., and Zaman, M.,  GeoCongress 2012, Oakland, CA, March 25-29, 2012.
  78. “Laboratory Investigation of Pullout Behavior of Non-extruded Geogrids in a Base Aggregate.” Mahmood T., Hatami K., Ghabchi, R., and Zaman, M.,  91st Transportation Research Board Annual Meeting, Paper No.12-4222, Washington, DC., Jan. 22-26, 2012.
  79. “Effect of Geogrid Type on Performance of Reinforced Dense-Graded Aggregate Base.” Ghabchi, R., Mahmood, T., Hatami, K., and Zaman, M.,  5th Asian Regional Conference on Geosynthetics, December 13-16, 2012, Bangkok, Thailand.
  80. “Comparison of Shape Parameters for Different Types and Sizes of Coarse Aggregates for Pavement Applications,” Singh, D.V., Zaman, M., and Commuri, S. (2012). Paper No. 12-0758, Transportation Research Record 92nd Annual Meeting, Washington, D.C., CD-ROM Publication, January 22-26, 2012.
  81. “Neural Network Modeling of 85th Percentile Speed for Two-Lane Rural Highways,” Singh, D.V., Zaman, M., and White, L., Paper No. 12-0876, Transportation Research Board 92nd Annual Meeting, Washington, D.C., CD-ROM Publication, January 22-26, 2012.
  82. “Evaluation of Resilient Response of Unbound Aggregates Toward Implementation of the Mechanistic-Empirical Pavement Design in Oklahoma,” Hossain, Z., Zaman, M., and Doiron, C.  91st Annual Meeting DVD-ROM Compendium Paper, Transportation Research Board (TRB), 2012.
  83. “Evaluation of High Temperature Viscoelastic Characteristics of Warm Mix Additive Modified Binders and Prediction of Dynamic Modulus of Mixes,” Hossain, Z., and Zaman, M., 91st Annual Meeting DVD-ROM Compendium Paper, Transportation Research Board (TRB), 2012.
  84. “Volumetric and Mechanistic Characteristics of Asphalt Mixes Containing Recycled Asphalt Pavement,” Solanki, P., Hossain, Z., Zaman, M., and Adje, D., GeoCongress 2012, March 25-29, 2012.
  85. “Mechanistic Evaluation of Recovered Materials from Recycled Asphalt Pavement,” Hossain, Z., Solanki, P., Zaman, M., GeoCongress 2012, March 25-29, 2012.
  86. “Recycled Asphalt Pavement in new Asphalt Mixtures: State of the Practice,” Hossain, Z., Buddhalla, A., O’Rear, A. O., Zaman, M., Laguros, J. L., and Lewis, S., 2nd International symposium on Asphalt Pavement and Environment, held in Fortaleza, Brazil on October 1-3, 2012.
  87. “Effect of Recycled Asphalt Pavement on Thermal Cracking Resistance of Hot Mix Asphalt,” Solanki, P., Hossain, Z., Adje, D., and Zaman, M., 2nd International Symposium on Constitutive Modeling of Geomaterials: Advances and New Applications, Beijing, China, October 15-16, 2012.
  88. “Evaluation of Mechanistic-Empirical Design Guide Input Parameters for Resilient Modulus of Stabilized Subgrade Soils,” Hossain, Z., Zaman, M., Doiron, C., and Solanki, P., ICSDEC 2012/ASCE Texas Section Conference/CI Summit, November 7-9, 2012.
  89. “A Study of Construction and Instrumentation of Pavement Test Section on I-35 in Oklahoma.” Solanki, P., Zaman, M., Muraleetharan, K., Briedy, M., Boser, R. and Park, B., Associated Schools Construction Region III Conference, Downers Grove, Illinois, Oct. 26-29, 2011, pp. 13-20.
  90. “Initial design and validation of packaging directional antennas for structural health and road condition monitoring,” Akkari, R.A., Pei, J.S., Ibrahim, T.S., Zaman, M.M., Tang, F.P., Tang, L., Breidy, M.,H., and Hurdelbrink, K.R.  SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 6-10, 2011, 6 pages.
  91. “Limitations of Field Permeability Test on Different Gradations of a Limestone Aggregate Base.” Ghabchi, R., Zaman, M. and Khoury, N.,13th International Conference of IACMAG, held in Melbourne, Australia on May 9-11, 2011, pp. 1116-1122.
  92. “Development of Rut Prediction Model from APA Rut Test,” Hossain, N., Solanki, P., and Zaman, M.,   13th International Conference of IACMAG, held in Melbourne, Australia on May 9-11, 2011, pp. 1093-1098.
  93. “Comparison of Hierarchical Levels of MEPDG for Predicting Dynamic Modulus of Asphalt Mix.” Singh, D.V., Zaman, M., and Commuri, S.,13th International IACMAG Conference, held in Melbourne, Australia on May 9-11, 2011, pp. 1099-1103.
  94. “Evaluation of Predictive Models for Estimating Dynamic Modulus of HMA Mixes Commonly Used in Oklahoma.” Singh, D.V., Zaman, M. and Commuri, S., 90th Annual TRB Meeting and Online Compendium paper (11-3885), held in Washington, DC. on Jan. 23-27, 2011, 18 pages.
  95. “In-Aggregate Performance of Unitized Woven Geogrids in Open-Graded and Dense-Graded Aggregates.” Hatami, K., Ghabchi, R., Mahmood, T. and Zaman, M., 90th Annual TRB Meeting and Online Compendium paper (11-4078), held in Washington, DC. on Jan. 23-27, 2011, 14 Pages.
  96. “Laboratory Evaluation of Water-bearing Additive for Warm Mix Asphalt.” Hossain, Z., M. Zaman, E. O’Rear, and Chen, D. 90th Annual TRB Meeting and Online Compendium paper (11-3381), to be held in Washington, DC. on Jan. 23-27, 2011, 13 Pages.
  97. “Effectiveness of Advera on Warm Mix Asphalt.” Hossain, Z., Zaman, M., O’Rear, E. and Chen, D-H., Geotechnical Special Publication (GSP 218), ASCE, Emerging Tech. for Materials Design, Rehabilitation, and Inspection of Roadway Pavements, pp. 9-16.
  98. “Characterization of Subgrade Resilient Modulus for Oklahoma Soils for Pavement Design.” Hossain, Z., Zaman, M., Doiron, C. and Solanki, P.,  GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4823-4832.
  99. “Characterization of Lime- and Fly Ash-Stabilized Soil by Indirect Tensile Testing.” Solanki, P. and Zaman, M., GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4438-4448.
  100. “In-Aggregate Performance of Unitized and Woven/Knitted Geogrids for Base Reinforcement Application.” Hatami, K., Mahmood, T., Ghabchi, R. and Zaman, M., GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4635-4644.
  101. “Effect of Long Term Oven Aging (LTOA) on Dynamic Modulus of Hot Mix Asphalt.” Singh, D., Zaman, M. and Commuri, S.,  GeoFrontiers 2011, held in Dallas, Texas on March 13-16, 2011, pp. 4773-4781.
  102. “Influence of Cement Kiln Dust on Strength and Stiffness Behavior of Typical Clays” (P. Solanki, P. and M. Zaman). To appear in Proc. ASCE Special Publication, GeoHunan, Changsha, PRC, Aug. 3-6, 2009.
  103. “Performance Assessment of Cementitiously Stabilized Subgrade Soils” (P. Solanki, N. Khoury and M. Zaman). CD ROM Publication (09-0288), 88th Transportation Research Board Meeting, Jan. 11-15, 2009.
  104. “Variations of Resilient Modulus of Subgrade Soils with Post-Compaction Moisture Contents” (B. Robert, N. Khoury, M. Zaman and C.N. Khoury). CD ROM Publication (09-0297), 88th Annual Transportation Research Board Meeting, Jan. 11-15, 2009.
  105. “Rheological Properties of Performance Grade Binders Using a Dynamic Mechanical Analyzer” (Z. Hossain and M. Zaman). Inaugural International Conference of the Engineering Mech. Inst., Minneapolis, May 18-21, 2008.
  106. “Moisture Susceptibility and Swelling Behavior of Stabilized Lean Clays” (P. Solanki, N. Khoury and M. Zaman). 12th IACMAG Conference, Goa, India, Oct. 1-6, 2008, pp. 3700-3709.
  107. “Dynamic Mechanical Analysis of Performance Grade Asphalt Binder” (Z. Hossain and M. Zaman).  Hossain, Z. and Zaman, M., 12th IACMAG Conference, Goa, India, Oct. 1-6, 2008, pp. 4354-4361.
  108. “Constitutive Modeling of Normal Strength and High Performance Concrete Using Hierarchical Single Surface Model” (M. Zaman, P. Solanki and M.P.Y. Chin). 12th IACMAG Conference, Goa, India, Oct. 1-6, 2008, pp. 1308-1315.
  109. “Neural Network-based Intelligent Compaction Analyzer for Estimating Compaction Quality of Hot Asphalt Mixes” (S. Commuri, A.T. Mai and M. Zaman). IFAC World Congress, Seoul, Korea, July 6-11, 2008.
  110. “Effect of Sasobit and Asphamin on Wettability and Adhesion Between Asphalt Binders and Aggregates” (N.M. Wasiuddin, M. Zaman and E.A. O’Rear). CD ROM Publication (08-2853), 87th Annual Transportation Research Board Meeting, Washington, D.C., Jan. 13-17, 2008.
  111. “Experimental Analysis and Statistical Modeling of Cementitiously Stabilized Subgrade Soil″ (P. Solanki, N. Khoury and M. Zaman). CD ROM Pub. (08-2474), 87th Annual Meeting, Washington, D.C., Jan. 13-17, 2008.
  112. “Estimating Resilient Modulus Using Neural Network Models” (M. Zaman, A. Ebrahimi and L. White). ANNIE 2007 Conf., St. Louis, Missouri, Nov. 11-14, 2007.
  113. “Innovation and Application of Environmental Technologies: Strategies, Progress, and Prospects in Oklahoma” (M. Meo, R.W. Nairn, J.G. Laguros and M. Zaman). 10th International Conference on Environmental Science and Technology, Kos Island, Greece, Sept. 5-7, 2007.
  114. “Stiffness and Drainage Characteristics of Unbound Aggregate Bases” (N.N. Khoury and M. Zaman). CD ROM Pub. (07-3022), 86th Annual Meeting of Transportation Research Board, Washington, D.C., Jan. 21-25, 2007.
  115. “Effect of Polymer Treatment Using Styrene-Butadiene Rubber for Moisture-Induced Damage Potential” (N.M. Wasiuddin, M. Zaman and E.A. O’Rear). CD ROM Publication (07-3248), 86th Annual Meeting of Transportation Research Board, Jan. 21-25, 2007, Washington, D.C.
  116. “Evaluating Laboratory Modulus and Rutting of Asphalt Concrete” (R.A. Tarefder, J.C. Stormount and M. Zaman). CD ROM Publication (07-1889), 86th Annual Meeting of Transportation Research Board, Jan. 21-25, 2007, Washington, D.C.
  117. “Comparative Study of Sasobit and Asphamin in Warm-Mix Asphalt” (N.M. Wasiuddin, S. Selvamohan and M. Zaman). CD ROM Publication (07-2047), 86th Annual Meeting of Transportation Research Board, Jan. 21-25, 2007, Washington, D.C.
  118. “Use of Raw Chat in Hot-Mix-Asphalt Surface: Environmental and Engineering Characterization” (N.M. Wasiuddin, W.B. Hamid, M. Zaman and R.W. Nairn). CD ROM Publication (07-3193), 86th Annual Meeting of Transportation Research Board, Jan. 21-25, 2007, Washington, D.C.
  119. “Engineering Behavior and Microstructure of Soil Stabilized with Cement Kiln Dust” (P. Solanki, N. Khoury and M. Zaman). Geo-Denver 2007 Conference, February 18-21, 2007, Denver, Colorado.
  120. “Optimizing Aggregate Base Gradation for Maximum Performance” (N. Khoury, M. Zaman, R.W. Nairn and J.G. Laguros). International Conference on Advanced Characterization of Pavement and Soil Engineering Materials, June 20-22, 2007, Athens, Greece (8 pages).
  121. “Characteristics of Chat-Asphalt for Road Base Application” (N.M. Wasiuddin, M. Zaman, R.W. Nairn and N. Kolothody). 21st International Conference on Solid Waste Tech. & Management, Philadelphia, Pennsylvania, March 26-29, 2006, pp. 333-342.
  122. “Acid-Base Characteristics of an Asphalt Binder with and without Anti-Strip Additives” (N.M. Wasiuddin, D.C. Howell, C.M. Fogle, M. Zaman and E.A. O’Rear). Airfield and Highway Pavements Specialty Conference, ASCE,Atlanta, Georgia, April 30-May 3, 2006, pp. 412-424.
  123. “Performance-Grade Changes in PG 64-22 Binder due to Selected Additives” (S. Selvamohan, M. Zaman and G. Gierhart). Proc. 7th International Congress on Advances in Civil Engineering (ACE), Oct. 11-13, Yildiz Tech. Univ., Istanbul, Turkey, Paper No. ACE 06-195, 2006 (8 pages).
  124. “Use of DMT for Subsurface Characterization: Strengths and Weaknesses” (H.-M. Lim, M. Zaman, and K. Hatami). Sec. Int. Conf. on Flat Dilatometer, Washington, D.C., April 2- 6, 2006, pp. 213-219, 2006.
  125. “Remediating and Recycling Lead Mining Waste in Oklahoma: The Use of Passive Treatment and Road Pavement Applications to Mitigate Environmental Hazards” (Nairn, R.W., Meo, M., Zaman, M., and Laguros, J.G.). (CD ROM) 9th International Conference of Environmental Science and Tech., held on Sept. 1-3 at Rhodes Island, Greece, 2005 (6 pgs).
  126. “Using Raw Chat in Hot Mix Asphalt for Pavement Applications” (Wasiuddin, N.M., Hamid, W.B., Zaman, M., Nairn, R.W. and Landers, T.). 22nd National Meeting of the American Society of Mining & Rec., ASMR, held on June 19-23 at Lexington, KY, 2005, CD ROM Publication (15 pgs).
  127. “Assessment of Surface Free Energy Characteristics of Performance Graded Asphalt Binders” (Wasiuddin, N.M., Barraza, H.J., Zaman, M. and O’Rear, E.A.). Geotechnical Special Publication No. 130-142, Geo-Frontiers, ASCE Conf. , held on Jan. 24-26 at Austin, Texas, 2005, pp. 151-163.
  128. “Performance of Stabilized Aggregate Beams Under Freeze-Thaw Cycles” (Khoury, N. and Zaman, M.). Proc. (CD ROM) Transp. Research Board 84th Annual Meeting, held on January 12-16 at Washington, D.C., 2005 (24 pgs).
  129. “Behavior of Stabilized Aggregate Bases Subjected to Cyclic Loading and Wet-Dry Cycles” (Khoury, N., Zaman, M. and Laguros, J.G.). Geotechnical Special Publication No. 130-142, Geo-Frontiers, ASCE Conf., held on Jan. 24-26 at Austin, Texas, 2005, pp. 61-70.
  130. “Using RAP Materials for Overlay: Laboratory and Field Study” (Zaman, M. , Tarefder, R. and Cheong, T.). 11th International Conference of IACMAG (Invited Paper) held on June 19-24 at Turin, Italy, Vol. 4, 2005, pp. 71-88.
  131. “Influence of Metric Suction on the Resilient Modulus of Kirkland Soil Series in Oklahoma” (Khoury, N. and Zaman, M.). 11th International Conference of IACMAG, held on June 19-24 at Turin, Italy, Vol. 2, 2005, pp. 81-88.
  132. “Characterizing Resilient Behavior of Asphalt Concrete for Use in Pavement Design” (Tarefder, R.A. and Zaman, M.). ASCE Geo-Trans Conf., held in Los Angeles, California on July 27-31, 2004.
  133. “Fluidized Bed Ash as a Stabilizing Agent for Roadway Base Materials” (Pandey, K.K., Zaman, M. and Laguros, J.G.,). ASCE Texas Section Fall Meeting, held at Houston, Texas, on September 29 – Oct. 2, 2004 (24 pgs).
  134. “Performance of Stabilized Base under Flexural and Compressional Cyclic Loading” (Khoury, N., Srour, C. and Zaman, M.). Proc. (CD ROM) of Geo-Trans, ASCE Geo-Institute Conf. held July 27-31 at Los Angeles, California, 2004 (10 pgs).
  135. “The Use of XRD Patterns to Evaluate the Compressive Strength of Stabilized Aggregates” (Khoury, N., Zaman, M. and Laguros, J.G.). Advances in X-Ray Analysis, held on August 4-8, 2003, Denver, Colorado, Proc. Published in 2004 (6 pgs).
  136. “Design and Evaluation of Neural Networks for Rutting of Asphalt Concrete.” Tarefder, A. and Zaman, M., ASCE Conference on Computational Intelligence held on October 20-22 at Baltimore, MD, pp. 38-48, 2004.
  137. “Evaluation of Rutting Potential in Asphalt Mixes using Finite Element Modeling” (Pirabarooban, S., Zaman, M. and Tarefder, R.A.). Annual Conference of the Transportation Association of Canada. Held on September 21-23, 2003 in Newfoundland, Canada (10 pgs).
  138. “Correlating Asphalt Concrete Modulus with Rut Potential” (Tarefder, R.A. and Zaman, M.). Third International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control, held on July 7-10, 2003 in Portugal, Vol. 1, pp. 207-217.
  139. “The Use of XRD Patterns to Evaluate the Compressive Strength of Stabilized Aggregates” (Khoury, N., Zaman, M. and Laguros, J.G.). Advances in X-Ray Analysis, held on August 4-8, 2003, Denver, Colorado )6 pgs).
  140. “2-D and 3-D Modeling of Rutting in Asphalt Pavement” (Zaman, M., Pirabarooban, S. and Tarefder, R.A.). International Conference on Highway Pvt. Data, Analysis and Mechanistic Design Applications, held on Sept. 7-10, 2003 in Columbus, Ohio (11 pgs).
  141. “Virtual Laboratory Modules for Undergraduate Strength of Materials Course” (A.R. Kukreti, M. Zaman, K. Gramoll and J.-H. Lee). ASEE 2002 Annual Conf. & Exhibition, held in New Mexico.
  142. “Evaluation of Relative Weight of Rutting Parameters” (R. Tarefder, M. Zaman and K. Hobson). of Canadian Technical Assoc. Held in Calgary, Canada, Nov. 2002.
  143. “An Application of the Dual-Porosity Porothermoelastic Approach in Naturally Fractured Porous Media” (R. Nair, Y. Abousleiman and M. Zaman). 2nd Biot Conf. on Poromechanics, held at Grenoble, France, Aug. 26-28, 2002, pp. 509-514.
  144. “DSC-Based Constitutive Modeling of High Performance Concrete” (M. Zaman, A.R. Kukreti and M.P. Chin). 14th US National Congress of Theoretical and Applied Mech., held in Blacksburg, Virginia, June 23-28, 2002, pp. 392-393.
  145. “Evaluating Rut Potential of Selected Asphalt Mixes for Improved Pavement Performance” (R. Tarefder and M. Zaman). CD Proc. Second Int. Conf. On Maintenance and Rehabilitation of Pavements and Technological Control, held at Auburn, Alabama, July 29-Aug. 1, 2001.
  146. “Numerical Analysis of Fluid Flow in Naturally Fractured Media” (K. Xia, M. Zaman and M. Bai). 10th IACMAG Intl. Conf., held in Tucson, Arizona Jan. 7-11, 2001, pp. 1815-1822.
  147. “Expert System for Evaluation of Groundwater Pollution Potential from CAFO.” (A.N.M. Ahsanuzzaman, K. Strevett, and M. Zaman). 10th IACMAG International Conference, Tucson, Arizona, Jan. 7-11, 2001, pp. 183-190.
  148. “Analysis of Consolidation Including Sand Drain” (with A. Alvappillai). John Booker Memorial Symposium, held in Sydney, Australia, Nov. 16-17, 2000 (13 pgs).
  149. “Computer-Based Learning Modules for Rigid Body Mechanics” (with A.R. Kukreti). Proc. (CD-ROM) 2000 ASEE Annual Conf., held at St. Louis, Missouri, June 18-21, 2000 (10 pgs).
  150. “Predicting the Performance of Pavement Drainage Systems Using a Neural Network Model” (with A.F. Alam, K. Muraleetharan, and S. Sudharsanan). Proc. (CD-ROM) EM 2000, Fourteenth Engineering Mech. Conference, held at Univ. of Texas at Austin, 2000 (5 pgs).
  151. “Porothermoelastic Solutions for an Inclined Borehole in Transversely Isotropic Porous Media” (with S. Ekbote and Y. Abousleiman). Fourth North American Rock Mech. Symposium Pacific Rocks 2000. Held at Seattle, Washington, July 31-Aug. 3, 2000, pp. 253-259.
  152. “Finite Element Modeling of an Inclined Wellbore in a Fractured Porous Medium Saturated with Oil and Gas” (with R. Nair, M. Bai, and Y. Abousleiman). Fourth North American Rock Mech. Symposium Pacific Rocks 2000. Held at Seattle, Washington, July 31-Aug. 3, 2000, pp. 189-196.
  153. “Modeling the 85th Percentile Speed on Oklahoma Two-Lane Rural Highways via Neural Network Approach” (with R. Issa and Y. Najjar). 2nd International Workshop on Artificial Intelligence and Math. Methods in Pavements and Geomech. Systems. Held at Univ. of Delaware, Aug. 11-12, 2000, pp. 99-108.
  154. “Teaching Rigid Body Mechanics Using Laptop Computers in the Classroom Versus the Traditional Way” (M. Zaman and A.R. Kukreti). 34th ASEE Midwest Section Conf. (Electronic Pub.), held in Stillwater, Oklahoma, April 14-16, 1999 (10 pages).
  155. “A Software for Poroelastic Analyses of Borehole Stability” (L. Cui, Y. Abousleiman, S. Ekbote, J.-C. Roegiers, and M. Zaman). SPE 54013, SPE Latin American and Caribbean Petroleum Eng. Conference, Caracas, Venezuela, April 21-23, 1999 (8 pages).
  156. “Time-Dependent Coupled Processes in Wellbore Design and Stability: PBORE-3D” (Y. Abousleiman, S. Ekbote, L. Cui, F. Mody, J.-C. Roegiers, and M. Zaman), SPE 56759, SPE Annual Technical Conference and Exhibition, Houston, Texas, Oct. 3-6, 1999 (10 pages).
  157. “Constitutive Properties of Rocks Under Dry and Saturated Conditions” (A.R. Kukreti and M. Zaman). Plasticity 1999 Symposium, held in Cancun, Maxico, Sept. 1999 (4 pages).
  158. “Analysis of Model Continuously Reinforced Concrete Pavement Using FLAC” (M. Zaman and A. Soltani). Int. FLAC Symposium On Numerical Modeling in Geomech., held in Minneapolis, Minnesota, Sept. 1-3, 1999, pp. 197-202.
  159. “Estimating Resilient Modulus of Aggregate Base by Backpropagation Neural Network Model” (R. Issa and M. Zaman). 4th International Conf. on Constitutive Laws for Engineering Materials, held at RPI, Troy, New York, July 27-30, 1999, pp. 493-496.
  160. “A Neural Network Model for Pavement Drainage Systems” (K. Muraleetharan, A. Alam, S. Sudharsan, and M. Zaman). 4th International Conference on Constitutive Laws for Engineering Materials, held at RPI, Troy, New York, July 27-30, 1999, pp. 489-492.
  161. “A Neural Network Model for a Cohesionless Soil” (M. Zaman and J.-H. Zhu). International Workshop on Artificial Intelligence and Math. Methods in Pavement and Geomechanical Sys., held at Florida Atlantic Univ., Miami, Nov. 5-6, 1998, pp. 39-54.
  162. “Foundation Analysis with Deformable Particles Using DDA” (K. Shyu, M.R. Salami and M. Zaman). Ninth IACMAG Conf., held in Wuhan, P.R.C., Nov. 2-7, 1997, pp. 469-472.
  163. “Vibration Characteristics of Foundation Slabs on a Two-Parameter Elastic Medium” (M. Zaman, M.O. Faruque, A. Agrawal, W. Low, and J.G. Laguros). Proc. ASCE Special Publ. No. 64: Observation and Modeling in Numerical Analysis and Model Tests in Dynamic Soil-Structure Interaction Problems, 97th ASCE Geo Institute Conference, held in Logan, Utah, July 16-19, 1997, pp. 122-137.
  164. “Physical and Numerical Modeling of Multiple Fracturing Under Tension in a Continuously Reinforced Concrete Slab” (A. Soltani, M. Zaman, and L. Ring). Of Ninth IACMAG Conf., held in Wuhan, P.R.C., Nov. 2-7, 1997, pp. 413-419.
  165. “Influence of Testing Procedure on Resilient Modulus of Aggregate Materials” (P. Tian, M. Zaman, and J.G. Laguros). Of Ninth IACMAG Conf., held in Wuhan, P.R.C., Nov. 2-7, 1997, pp. 795-800.
  166. “Characterization of Ground Subsidence of Abandoned Mines” (Y. Najjar, M. Zaman, J.L. Ahern, and J.G. Laguros). International Conference On Innovation in Computer Methods for Civil and Structural Engineering, Cambridge, England, Aug. 19-21, 1997, pp. 23-30.
  167. “Minimizing Numerical Oscillation in the Consolidation Analysis” (M. Bai, J.-C. Roegiers, M. Zaman, and D. Elsworth). NUMOG VI: Numerical Models in Geomechanics, held in Montreal, Canada, July 2-4, 1997, pp. 359-354.
  168. “Constitutive Modeling of Weak Rocks With Application to Reservoir Compaction” (M. Zaman, A. Abdulraheem, Y. Abousleiman, and J.-C. Roegiers). Plasticity ’97: The Sixth International Symposium On Plasticity and Its Current Applications, held in Juneau, Alaska, July 14-18, 1997, pp. 333-334.
  169. “Coupling of Constitutive and Permeability Rock Models in a Flow Simulator” (A.R. Kukreti, M. Zaman, and L. Ring). Plasticity’ 97: The Sixth International Symposium On Plasticity and Its Current Applications, held in Juneau, Alaska, July 14-18, 1997, pp. 313-314.
  170. “Multiaxial Testing and Constitutive Modeling of Coal” (M. Zaman, D.-H. Chen, and Y.M. Najjar). Ninth IACMAG Conf., held in Wuhan, Nov. 2-7, 1997, pp.285-292.
  171. “Field Evaluation of Pavement Drainage” (M. Zaman, M. Rahman, and K. Muraleetharan). International Conference On Rehabilitation and Development of Civil Eng. Infrastructure Systems, held in Beirut, Lebanon, June 9-11, 1997, pp. 600-618.
  172. “Neuronets: On Theory and Practice in Civil Engineering” (M. Knaj, J.-C. Roegiers, and M. Zaman). International Conference On Rehabilitation and Development of Civil Engineering Infrastructure Systems, held in Beirut, Lebanon, June 9-11, 1997, pp. 1258-1269.
  173. “Prediction of Shear Stress-Strain Behavior of Soil with Recurrent Neural Network” (J.H. Zhu, M. Zaman, and T.B. Trafalis). Artificial Neural Networks in Engineering (ANNIE’ 96), Vol. 6, Smart Engineering Systems: Neural Networks, Fuzzy Logic and Evolutionary Programming, held in St. Louis, Missouri, Nov. 10-13, 1996, pp. 809-814.
  174. “Free Vibration Analysis of Rectangular Plates Resting on a Two-Parameter Elastic Medium” (M. Zaman, M.O. Faruque, A. Agrawal, and J.G. Laguros). First International Conf. On Earthquake Resistant Design of Engineering Structures, ERES 96, held in Greece on Oct. 30-Nov. 1, 1996, Vol. 2, pp. 583-592.
  175. “Permeability Measurements Under Different Stress Paths for a Weakly Cemented Sandstone” (G. Krishnan, M.M. Zaman, and J.-C. Roegiers). NARMS’96, held in Montreal, Canada, June 19-21, 1996, pp. 1011-1017.
  176. “Development of a Coupled Constitutive-Flow Rock Model for Indiana Limestone” (A.R. Kukreti, M.M. Zaman, and P. Suri). NARMS’96, held in Montreal, Canada, June 19-21, 1996, pp. 1305-1313.
  177. “A Phenomenological Creep Model for Rocksalt” (M. Zaman, M.O. Faruque, and M.W. Wei). Developments in Theoretical and Applied Mech., Vol. XVIII, Univ. of AL, Tuscaloosa, 1996, pp. 237-248.
  178. “Nonlinear Analysis of Underreamed Shafts” (M. Zaman, I. Houssamy, and R.M. Salami). 1st International Forum on DDA & Simulations of Discontinuous Media, held in Berkeley, CA, June 12-14, 1996, pp. 586-595.
  179. “Determining Contact Stresses on Potatoes Stored in Bulk Bins by Using Discontinuous Deformation Analysis” (M.R. Salami, A. Shahbazi, M. Zaman, and M. Zargham). First International Forum on DDA and Simulations of Discontinuous Media, held in Berkeley, California, June 12-14, 1996, pp. 415-431.
  180. “Discontinuous Deformation Analysis Using the Third Order Displacement Function” (M.Y. Ma, M. Zaman, and J.H. Zhu). First International Forum on DDA and Simulations of Discontinuous Media, held in Berkeley, California, June 12-14, 1996, pp. 383-394.
  181. “Modeling Stress-Strain Behavior and Determination of Material Parameters of Rocks for a Plasticity Model” (P. Suri, A.R. Kukreti, M. Zaman and J.-C. Roegiers). Fifth International Symposium on Plasticity and Its Current Applications, held at Osaka, Japan, July 17-21, 1995, (4 pages).
  182. “Cyclic Testing of Aggregate for Pavement Design” (M.M. Zaman, D.-H. Chen, and J.G. Laguros). Third International Conf. on Recent Advances in Geotechnical Earthquake Engr., held in St. Louis, Missouri, April 2-7, 1995, Vol. I, pp. 53-56.
  183. “Object-Oriented Programming Aspects of the SITEX System” (M. Kanj, M. Zaman and J.-C. Roegiers). 3rd Int. Conf. on Comp. Met. and Water Resources, held in Beirut, Lebanon, Sept. 25-28, 1995, pp. 383-390.
  184. “Highlights from the Knowledge-Base of a Sanding Advisor Called SITEX” (M. Kanj, M. Zaman and J.-C. Roegiers). 3rd Int. Conf. on Comp. Met. and Water Resources, held in Beirut, Lebanon, Sept. 25-28, 1995, pp. 391-398.
  185. “Using a Finite Element Program ABAQUS in Predicting the Cooling Rates of Hot Mix Asphalt” (D.H. Chen, M. Zaman, Y. Mehta and J.G. Laguros). NUMOG V Symp., Davos, Switzerland, Sept. 6-8, 1995, pp. 663-666.
  186. “Numerical Modeling for Assessment of Cooling Rates of Hot Mix Asphalt Overlays” (D.H. Chen, Y. Mehta, M.M. Zaman, J.G. Laguros and L. Senkowski). Sixth International Conference on Civil and Structural. Eng. Computing, Cambridge, England, August 28-30, 1995, pp. 105-108.
  187. “Mechanistic-Empirical Methodology for Conventional Flexible Pavement Design (D.H. Chen, M. Zaman and J.G. Laguros). Sixth International Conference on Civil and Structural. Eng. Computing, Cambridge, England, August 28-30, 1995, pp. 191-194.
  188. “Behavior of Natural and Remolded Antler Sandstone: Sample Preparation and Grain Crushing Aspects” (H. Wang, G. Krishman, M. Zaman, and J.-C. Roegiers). 35th U.S. Rock Mech. Symposium, Lake Tahoe, June 4-7, 1995, pp. 127-133.
  189. “Stress-Dependent Permeability Measurement Using the Pulse Technique” (P. Suri, M. Azeemuddin, M. Zaman, A.R. Kukreti and J.-C. Roegiers). 35th U.S. Rock Mech. Symposium, Lake Tahoe, June 4-7, 1995, pp. 645-650.
  190. “Assessment of Distress Models for Prediction of Pavement Service Life” (D.H. Chen, M. Zaman and J.G. Laguros). ASCE Specialty Conf. on Infrastructure: New Materials and Methods for Repair, held at San Diego, California, Nov. 14-16, 1994, 8 pgs.
  191. “Bonded Aggregate Base-Pavement-Subgrade Interaction” (M. Zaman, R. Radhakrishnan, and J.G. Laguros). Advances in Simulation and Interaction Techniques, Edited by M. Papadrakakis and H.V. Topping, 1994, pp. 67-72.
  192. “Numerical Modeling of Bridge Approach Settlement with Foundation-Embankment Interaction” (M. Zaman, D. Bhat and J.G. Laguros). ASCE Geotechnical Special Publ. No. 40, of Settlement 94 Conf. held at College Station, Texas, June 16-18, 1994, Vol. 2, pp. 1400-1414.
  193. “Acoustic Velocity Anisotropies in Cordoba Cream Limestone During Different Deformational Stress Paths” (M. Azeemuddin, T.E. Scott, Jr., M. Zaman, and J.-C. Roegiers). NARMS-94 Symposium, held in Austin, Texas, June 1-3, 1994, NARMS-94, pp. 775-782.
  194. “Pore collapse Mechanisms in Cordoba Cream Limestone” (S. Mowar, M. Zaman, D.W. Stearns and J.-C. Roegiers). NARMS-94 Symposium, held in Austin, Texas, June 1-3, 1994, pp. 767-773.
  195. “Constitutive Modeling of Sand: A Comparative Study” (Y.M. Najjar, M.M. Zaman and R. Tabbaa). IACMAG-94 Conf., held at Morgantown, West Virginia, May 22-28, 1994, Vol I, pp. 641-646.
  196. “Wellbore Stability in a Transversely Isotropic Medium” (D. Gupta and M. Zaman). IACMAG-94 Conf., held at Morgantown, West Virginia, May 22-28, 1994, Vol. III, pp. 2065-2070.
  197. “Statistical Modeling of Bridge Approach Settlement” (R. Jha, M. Zaman, J.G. Laguros and J. Nevels). IACMAG-94 Conference, held at Morgantown, West Virginia, May 22-28, 1994, Vol. II, pp. 1489-1494.
  198. “Effective Stress Creep Model for Rock Salt” (M.I. Hossain, M. Zaman and M.O. Faruque), IACMAG-94 Conference, held at Morgantown, West Virginia, May 22-28, 1994, Vol. III, pp. 2253-2258.
  199. “3-D Testing and Constitutive Modeling of Inherently Anisotropic Sand” (D.H. Chen, M. Zaman and A. Oyesanya), in Theoretical and Applied Mech. (Proc. SECTAM-94), Vol. XVII, 1994, pp. 400-414.
  200. “Numerical Evaluation of Bridge Approach Settlement” (M. Zaman, D. Bhat and J.G. Laguros). Impact of Computational Mech. to Engr. Probs., Sydney, Australia, Aug. 2, 1993, pp. 175-182.
  201. “On Developing an Expert System for Sand Control” (M. Kanj, M. Zaman and J.-C. Roegiers). , 7th Oklahoma Symp. on Artificial Intelligence, held in Stillwater, Nov. 18-19, 1993 (7 pgs.).
  202. “Computer Aided Analysis of Nonlinear Consolidation” (D. Bhat, M. Zaman and J. Laguros). , 13th Annual ASME Int. Mtg. on Computer Eng., held in San Diego, California, Aug. 8-11, 1993, pp. 515-523.
  203. “Application of Nonlinear Finite Element Method in Prediction of Ground Subsidence” (Y. Najjar, D.H. Chen and M. Zaman). , First Canadian Symposium on Numerical Modelling and Applications in Mining and Geomech., March 27-30, 1993, pp. 140-149.
  204. “A FE Model for Ekofisk Field Subsidence” (A. Abdulraheem, M. Zaman and J.-C. Roegiers). Composite Material Technology, PD-Vol. 53, ASME, 1993, pp. 103-110.
  205. “Characterization of Volumetric Response in Sands” (M. Zaman, M.O. Faruque and A. Abdulraheem), 4th International Symp. on Plasticity and Its Current Applications, held in Baltimore, Maryland, July 19-23, 1993 (4 pgs.).
  206. “Anisotropic Constitutive Model for Pressure Sensitive Materials” (Y.M. Najjar, M. Zaman and D.H. Chen). , 4th International Symp. on Plasticity and Its Current Applications, held in Baltimore, Maryland, July 19-23, 1993 (4 pgs.).
  207. “Numerical Modeling of Mining Induced Subsidence” (M. Zaman, A.R. Kukreti and D.H. Chen). , 2nd Asian-Pacific Conf. on Computational Mech., held in Sydney, Australia, Aug. 3-6, 1993, Vol. I, pp. 521-526.
  208. “Constitutive Modeling of Geomaterials and Interfaces/Joints Including Recent Concepts, Localization, Stability and Micromechanics” (C.S. Desai and M. Zaman). Proc., S.-Canada Workshop Proceedings: Recent Accomplishments and Future Trends in Geomechanics in the 21st Century” Proceedings published in November, 1993, pp. 39-46.
  209. “Expert Systems in Transportation Engineering” (M. Zaman, G. Bozai, et. al.). 3rd International Conference on the Applications of AI of Civil and Structural Engineering, held at Edinburgh, U.K., Aug. 17-19, 1993, pp. 183-188.
  210. “FE Modeling of Pavement Joints for Dynamic Analysis” (A. Alvappillai and M. Zaman). Contact Mechanics 93, held at Southhampton, U.K., July 13-15, 1993, pp. 509-518.
  211. “Numerical Simulation of a Compacting Reservoir” (A. Abdulraheem, M. Zaman and J.-C. Roegiers). 34th U.S. Symposium on Rock Mech., held at Madison, Wisconsin, June 27-30, 1993, pp. 475-478. (Revised version published in IJRMMS Journal).
  212. “Numerical Modeling of Ground Subsidence due to Mining” (Y.M. Najjar and M. Zaman). 34th U.S. Symposium on Rock Mech., held at Madison, Wisconsin, June 27-30, 1993, pp. 737-740. (Revised version published in IJRMMS Journal).
  213. “Dynamic Testing of Aggregate Bases” (D.H. Chen, M. Zaman and J.G. Laguros). 6th International Conference on Soil Dyn. and Earthquake Engr., Southhampton, U.K., June 14-16, 1993, pp. 259-274.
  214. “Recent Expert System in Well Completion and Stimulation” (M. Kanj, M. Zaman and J.-C. Roegiers). 6th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, Edinburgh, U.K., June 1-4, 1993, pp. 441-449.
  215. “Laboratory Testing and Constitutive Modeling of Coal Including Anisotropy” (D.H. Chen, M. Zaman and A.R. Kukreti). Materials Research Society Fall Meeting, Boston, Nov. 30 – Dec. 4, 1992 (Proc. published in 1993), pp. 349-354.
  216. “Application of Nonlinear Finite Element Method in Prediction of Ground Subsidence due to Underground Mining” (Y.M. Najjar, D.H. Chen and M. Zaman). Canadian Symposium on Num. Modeling Application in Mining and Geomech., held on March 27-30, 1993, Montreal, Canada, pp. 140-149.
  217. “A FE Model for Ekofisk Subsidence” (A. Abdulraheem, M. Zaman and J.C. Roegiers). Composite Material Technology, The Energy-Sources Technology Conference and Exhibition, held at Houston, Texas, Jan. 31-Feb. 3, 1993, pp. 103-110.
  218. “Pore Collapse Behavior of Cordoba Cream Lime Stone” (M. Azeemuddin, M. Zaman, J.-C. Roegiers and S. Mowar). 4th International Symposium on Numerical Models in Geomech. (NUMOG IV), held in Swansea, U.K., Aug. 24-27, 1992, pp. 291-300.
  219. “Mechanics of Pore Collapse and Compaction in Weak Porous Rocks” (A. Abdulraheem, J.-C. Roegiers, and M. Zaman). 33rd U.S. Symposium on Rock Mechanics, Santa Fe, New Mexico, June 3-5, 1992, pp. 233-242.
  220. “Dynamic Response of Concrete Airport Pavements to Temperature Induced Warping” (M.R. Taheri, M. Zaman and V. Khanna). SECTAM XVI Conference, Nashville, Tennessee, April 12-14, 1992, pp. II.10.17 – II.10.26.
  221. “Pore Collapse in Weakly Cemented and Porous Rocks” (M. Zaman, J.-C. Roegiers, A. Abdulraheem and M. Azeemuddin). Composite Material Technology, The Energy-Sources Technology Conference and Exhibition, Houston, Texas, Jan. 26-30, 1992, pp. 123-132.
  222. “Soil Stabilization Using Cement Kiln Dust” (M. Zaman, A. Sayah and J.G. Laguros). 7th International Conference on Expansive Soils, Dallas, Texas, Aug. 3-5, 1992, pp. 347-351.
  223. “Behavior of Building Foundations on Expansive Soil: A Case Study” (M. Zaman and J.G. Laguros). World Building Congress, Montreal, Canada, 18-20 May, 1992, Vol. I, pp. 206-207.
  224. “Modeling Creep Behavior of Rock Salt” (M. Zaman, M.O. Faruque, and M.I. Hossain). Composite Material Technology, PD-Vol. 45, The Energy-Sources Technology Conference and Exhibition, Houston, Texas, Jan. 26-30, 1992, pp. 51-56.
  225. “Application of Expert Systems in Transportation Engineering: A Critical Review” (M. Zaman, G. Bozai, A.S. Mangaokar, J.F. Harp, J.L. Gattis and J.G. Laguros). Fifth Oklahoma Symposium on Artificial Intelligence, held in Norman, Nov. 20-22, 1991, pp. 57-63.
  226. “Constitutive Modeling of Concrete for Nuclear Reactor Application” (Y.M. Najjar and M. Zaman). SMiRT-11 Conference, held in Japan, Aug. 18-23, 1991 (6 pages).
  227. “A Constitutive Model to Characterize Dilatancy in Rocks” (J.-C. Roegiers, M. Zaman, A. Abdulraheem and M. Azeemuddin). 32nd U.S. Rock Mech. Symposium held in Norman, Oklahoma 10-12 July, 1991, pp. 531-538.
  228. “Circular Plate-Elastic Halfspace Interaction Analysis Including Transverse Shear Deformation” (M.O. Faruque, A. Mahmood and M. Zaman). IACMAG-91 Conference, held in Australia in May 1991, Vol. II, pp. 1147-1152.
  229. “Constitutive Modeling of Pueblo Sand” (M. Zaman and M.O. Faruque). IACMAG – 91 Conference, held in Australia in May 1991, Vol. I, pp. 709-714.
  230. “Influence of Back-Fill Soil Properties on Behavior of Buried Pipes.” ASCE Conf. on Pipeline Crossings, held in Denver, Colorado, March 26-27, 1991, pp. 129-138.
  231. “Dynamic Response of Square and Rectangular Foundations on Two-Parameter Elastic Medium” (A. Alvappillai, M. Zaman and M.O. Faruque). Second International Conference on Geotech. Earthquake Engineering. and Soil Dyn., St. Louis, Missouri, March 11-15, 1991, Vol. I, pp. 679-684.
  232. “Constitutive Model for Cohesionless Soil” (M.O. Faruque, M. Zaman and A. Abdulraheem). 3rd Int. Conference on Const. Laws for Engineering. Materials, Tucson, Arizona, Jan. 7-11, 1991, pp. 123-127.
  233. “A High Capacity Cubical Device and Multi-Axial Testing for Constitutive Modeling of Concrete” (A.R. Kukreti, M. Zaman and D.K. Mishra). 3rd International Symposium on Plasticity, France, August 1991 (4 pages).
  234. “Evaluation of Hierarchical Models Using Pueblo Sand Data” (M. Zaman, M.O. Faruque and R. Tabbaa). 3rd Int. Conf. on Const. Laws for Engineering Materials, Tucson, Arizona, Jan. 7-11, 1991, pp. 787-791.
  235. “A Thermo-Mechanical Creep Constitutive Model for Metals with Application” (M.O. Faruque and M.M. Zaman). Thirteenth Annual Energy-Sources Tech. Conference (Composite Material Technology), New Orleans, Louisiana, Jan. 14-18, 1990, PD-Vol. 32, pp. 173-176.
  236. “Predicting Behavior of Buried Pipes Using a Mixed Finite Element Approach” (M. Zaman and J.G. Laguros). Conference on Flexible Pipes, Columbus, Ohio, Oct. 22-24, 1990, pp. 163-169.
  237. “A Mixed Variational Approach for Analysis of Axisymmetric Plates on Elastic Halfspace” (M.O. Faruque, M.M. Zaman and M.R. Taheri). 3rd Iranian Congress, held in Shiraz, Iran, May 14-16, 1990, (18 pgs).
  238. “Dynamic Response of Bridges to a Moving Mass Load: Structural Impedance and Finite Element Methods” (M.R. Taheri and M.M. Zaman). 3rd Iranian Congress, held in Shiraz, Iran, May 14-16, 1990, (19 pgs).
  239. “Analysis of Consolidation Settlements of Two Bridge Approaches in Oklahoma” (A. Gopalasingam, M.M. Zaman and J.G. Laguros). Fifth International Symposium on Numerical Methods in Engineering held in Lausanne, Switzerland, Sept. 11-15, 1989, pp. 401-408.
  240. “Seismic Response of Nuclear Reactors in Layered Liquefiable Soil Deposits Including Nonlinear Soil-Structure Interaction” (M.M. Zaman and S.M. Mamoon). 10th International Conference on Structural Mech. in Reactor Technology, held in Anaheim, California, Aug. 14-18, 1989, Vol. K1, pp. 199-204.
  241. “An Improved Two-Surface Plasticity Model for Concrete and Rocks Subject to Three-Dimensional Loading” (M.M. Zaman, A.R. Kukreti and Y.M. Najjar). Second International Symposium on Plasticity and Its Current Applications, held at Mie University, Japan, 1989, pp. 47-50.
  242. “Prediction of Surface Subsidence Caused by Underground Mining Using a Nonlinear Finite Element Procedure” (Y.M. Najjar, M.M. Zaman and J.L. Ahern). 3rd International Symosium. on Numerical Models in Geomechanics (NUMUG III), held in Niagara Falls, Canada, May 8-11, 1989, pp. 557-565.
  243. “Stability Analysis and Characterization of Ground Subsidence of Abandoned Lead-Zinc Mines in Northeastern Oklahoma” (M.M. Zaman, J.L. Ahern and Y.M. Najjar). 30th U.S. Symposium on Rock Mechanics, held in Morgantown, West Virginia, June 19-22, 1989, pp. 707-714.
  244. “Creep Response of Aluminum 2618-T61 Under Multiaxial Loading” (M.M. Zaman, I.U. Mahmood and M.O. Faruque). ASME Winter Annual Meeting, Chicago, IL, Nov. 28-Dec. 2, 1988, PVP Vol. 153, pp. 61-67.
  245. “Effect of Loading Sequence and Soil Nonlinearity on the Response of a Pile Group Foundation Using a Three-Dimensional Finite Element Analysis” (Y.M. Najjar and M.M. Zaman). 6th International Conference on Numerical Methods in Geomechanics, Austria, April 11-15, 1988, Vol. 2, pp. 1127-1134.
  246. “Simulation of Drilled Pier Behavior Under Three-Dimensional Loading” (M.M. Zaman and I. Houssamy). Second International Conference on Case Histories in Geotechnical Engineering, St. Louis, Missouri, June 1-5, 1988, Vol. II, pp. 1505-1508.
  247. “Reliability of Constitutive Parameter for a Soil Obtained from Laboratory Test Data” (M.M. Zaman, A. Honarmandebrahimi and J.G. Laguros). 6th International Conference on Numerical Methods in Geomechanics, Austria, April 11-15, 1988, Vol. 3, pp. 2001-2008.
  248. “Significance of Testing Procedure and Equipment on Determination of Constitutive Parameters for Soil” (A. Honarmandebrahimi and M.M. Zaman). International Conference on Numerical Methods in Eng.: Theory and Applications, Swansea, England, July 6-10, 1987, Vol. 2, pp. c18/1-8.
  249. “Earthquake Response of Bridge Piers with Base Isolators and Energy Dissipators” (M.M. Zaman, J.G. Laguros and M.P. Ardhanareeswaran). 5th Canadian Conference on Earthquake Engineering, Ottawa, Canada, July 6-8, 1987, pp. 427-434.
  250. “A Finite Element Model for Simulation of Field Load Test of a Drilled Shaft” (M.M. Zaman and A.I. Uppal). Second Int. Conf. on Constitutive Laws for Engineering Materials: Theory and Practice, Tucson, Arizona, Jan. 5-10, 1987, Vol. II, pp. 1129-1136.
  251. “Effects of Soil-Structure Interaction on the Liquefaction Characteristics of a Site” (M.M. Zaman and S. Mamoon). 3rd U.S. National Conference on Earthquake Engineering, Charleston, South Carolina, Aug. 1986, pp. 541-552.
  252. “Stability of Underground Tunnels in Jointed Rocks Subjected to Blast Loading” (M.M. Zaman and M. Shah). International Symposium on Underground Mining, Univ. of Nottingham, Sept. 8-13, 1986, (10 pgs).
  253. “The Ultimate Capacity of Underreamed Drilled Piers by Finite Element Methods” (M.M. Zaman and A.I. Uppal). Southeastern Conference on Theoretical and Applied Mech., Columbia, SC, April 17-18, 1986, pp. 469-475.
  254. “Simulation of Waterflooding in Heterogeneous, Compressible and Irregularly Shaped Reservoirs” ( A.R. Kukreti, M.M. Zaman, F. Civan, Y. Perera and G.C. Biswas). International Symposium on Variational Methods in Geosciences, Norman, Oklahoma, Oct. 15-17, 1985, pp. 279-284.
  255. “On the Modeling of Soil Liquefaction and Foundation Response by Finite Element Method” (M.M. Zaman and J.G. Laguros). International Symposium on Variational Methods in Geosciences, Norman, Oklahoma, Oct. 15-17, 1985, pp. 291-296.
  256. “Analysis of Cylindrical Structure-Foundation Interaction Using Variational Approach” (M.M. Zaman, A. Issa and I.U. Mahmood). 2nd International Conference on Variational Methods in Engineering, held at the Univ. of Southhampton, July 17-19, 1985, pp. 12-3 to 12-12.
  257. “Evaluation of Liquefaction Potential of Earth Dams Under Cyclic Loading” (G.C. Biswas and M.M. Zaman). 2nd International Conference on Soil Dyn. & Earthquake Eng., held on Board QE-2, June/July 1985, pp. 6-13 to 6-22.
  258. “Effects of Soil Liquefaction on Seismic Response of Nuclear Power Plants” (M.M. Zaman and G.C. Biswas). 8th International Conference on Structural Mechanics in Reactor Technology, held in Brussels, Belgium, Aug. 19-23, 1985, Vol. B, Paper No. BK2/3, pp. 487-492.
  259. “Soil-Structure Interaction During Strong Motion for Bridge Piers with Base Isolators and Energy Dissipators” (M.P. Ardhanareeswaran, M.M. Zaman and L.R.L. Wang). 5th International Conference on Numerical Methods in Geomechanics, held at Nagoya, Japan, 1985, pp. 851-866.
  260. “Evaluation of `Thin-Layer Element’ and Modelling of Interface Behavior in Soil-Structure Interaction.” 5th International Conference on Numerical Methods in Geomech., held at Nagoya, Japan, 1985, pp. 1797-1803.
  261. “Rectangular Plate-Elastic Halfspace Interaction: An Energy Approach,” 4th International Conference on Applied Numerical Modeling, National Cheng Kung Univ., Taiwan, Dec. 27-29, 1984.
  262. “Numerical Modelling of Pressuremeter Tests in Rocks with Inelastic Discontinuities.” 4th International Conference on Applied Numerical Modelling, National Cheng Kung University, Taiwan, Dec. 27-29, 1984.
  263. “Influence of Interface Conditions on Dynamic Response of Axially Loaded Piles” (M.M. Zaman and S.L. Kuang). International Symposium on Dynamic Soil-Structure Interaction, Univ. of Minnesota, Minneapolis, Sept. 4-5, 1984, pp. 75-83.
  264. “An Energy Method for Plate-Halfspace Interaction” (M.M. Zaman and M.O. Faruque). 5th ASCE EMD Specialty Conference, held at Laramie, Wyoming, Aug. 1984, Vol. 1, pp. 571-574.
  265. “The Measurement of Cyclic Interface Response” (E.C. Drumm, C.S. Desai and M.M. Zaman). 5th ASCE EMD Specialty Conf., held at Laramie, Wyoming, Aug. 1984, Vol. 2, pp. 1345-1348.
  266. “Response of Circular Subway Tunnels in Layered Discontinuous Geologic Media” (M.M. Zaman and S.L. Kuang). Southeastern Conference on Theoretical and Applied Mech. (SECTAM XII), held in Callaway Gardens, Georgia, May 1984, Vol. 2, pp. 212-217.
  267. “Influence of Interface Behavior in Dynamic Soil-Structure Interaction” (C.S. Desai and M.M. Zaman). 8th World Conference on Earthquake Engineering, San Francisco, July 1984, Vol. III, pp. 1049-1056.
  268. “Approximate Analysis of Uniformly Loaded Circular Plates on Isotropic Elastic Halfspace” (M.O. Faruque and M.M. Zaman). IX Congress, National Academy of Eng. of Mexico, Leon, Mexico, Sept. 1983, pp. 271-276.
  269. “Modelling of Interface Behavior in Dynamic Soil-Structure Interaction” (M.M. Zaman and C.S. Desai). Trans. 7th International Conference on Structural Mech. in Reactor Tech. (SMiRT), Chicago, Illinois, Aug. 1983, Vol. K(b), pp. 33-41.
  270. “Modelling of In Situ Tests in Jointed Rocks” (M.O. Faruque and M.M. Zaman). of the Eighth Conf. on Electronic Computation, University of Houston, Houston, Texas, Feb. 1983, pp. 88-101.
  271. “Models for Sliding and Separation at Interfaces Under Static and Cyclic Loading” (M.M. Zaman and C.S. Desai). International Conference on Constitutive Laws for Engineering Material: Theory and Applications. Univ. of Arizona, Tucson, Arizona, Jan. 1983, pp. 383-390.
  272. “An Algorithm for Determining Parameters for Cap Model from Raw Laboratory Test Data” (M.M. Zaman, C.S. Desai and M.O. Faruque). 4th International Conference on Numerical Methods in Geomechanics, Edmonton, Canada, 1982, pp. 275-285.